Roland HP-7 Owner's Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
Chapter 4. Recording Your Performance
Recording a New Song
Record only the keyboard performance without playing along with a built-in song
or rhythm.
fig.panel4-1
Recording settings (select “USr”)
1
Press the [Song/Tempo] button, getting its indicator to light in red.
The song number appears in the display.
2
Press [+] and [-] buttons simultaneously, and “USr” appears in the
display.
Specifying the tone and tempo for recording
3
Select the tone that you want to play (p. 15).
4
If necessary, turn on the metronome.
Sound the metronome while you set the tempo and beat of the song (p. 18).
5
Press the [ (Rec)] button.
The [ (Rec)] button’s indicator will light, the [ (Play)] button’s indicator will
blink, and you will be in recording-standby mode.
Start recording
6
Recording will start when you either press the [ (Play)] button or play
the keyboard.
The HP-7/3 counts down two measures, then recording starts.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [ (Play)] button. There is no count sound played
when you start in this manner.
When recording begins, the [ (Play)] button and [ (Rec)] button indicators will
light. Go ahead and perform on the keyboard.
Stop recording
7
Press the [ (Play)] or [ (Rec)] button.
The indicators for the [ (Play)] and [ (Rec)] buttons will go dark.
Play back the recorded performance
8
Press the [ (Play)] button.
You will hear the recorded performance.
Once again press the [ (Play)] button, and playback will stop.
3 1 5, 74
6, 8
2
HP-7
NOTE
If you layer a newly recorded
performance without erasing
the recorded song, the song
tempo and beat will be stored
with the settings that were
recorded first.
NOTE
A performance that was
recorded without using
rhythm cannot be played back
with the rhythm.
If you want to record along
with the rhythm, refer to p. 29.
A
bout the “USr” display
When you stop recording, the
“” display will change
to “ ”.
The “.” in the lower right of the
display indicates that there is
already a recorded
performance.
If you record without
specifying the recording track,
the performance will be
recorded to the [1] button.
If you want to record the right
and left hands separately on
separate recording tracks, refer
to “Selecting and Recording
the Track for Each Hand
Separately” (p. 31).
HP-7/3_e.book 28 ページ 2004年1月26日 月曜日 午後5時1分
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Comments to this Manuals

No comments