Roland PCR-1 User Manual download pdf (Page 62)

Use MIDI functionality

Specifying the button mode

When you make Assign settings (p. 61) in Edit mode to assign a message to a button, you must

specify the operating mode of the button (button mode).

When you use a button as a controller, turning the button on will transmit the maximum

specified value, and turning it off will transmit the minimum value.

1. Press the [0] or [1] key to select either Latch mode or Toggle mode.

2. Press the [ENTER] button.

0 Latch mode

The setting will turn on when you press the button, and off

when you release it. The button will remain lit while you are

pressing it.

1 Toggle mode

The setting will alternate on/off each time you press the but-

ton. The button will light when an On message is transmitted,

and will go dark when an Off message is transmitted.

Specifying the port

When you are making Assign settings (p. 61) in Edit mode and have selected Advanced mode,

you must specify the USB port to which the message assigned to the controller will be sent

when using a USB connection.

1. Press a key [1] – [3] to select the port.

2. Press the [ENTER] button.

* For details on the port, refer to Input / output devices (p. 44).

1 PORT 1 Messages will be sent to “PCR-1 1”

2 PORT 2 Messages will be sent to “PCR-1 2”

3 PORT 1, 2 Messages will be sent to both “PCR-1 1” and “PCR-1 2”

PCR-1_e1.book 62 ページ２００３年１１月２０日　木曜日　午後３時２２分

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 127 128

No comments

Roland PCR-1 User Manual Page 62