Roland AR-200 User Manual download pdf (Page 21)

Recording Audio

Basic Editing Operations

Recording Type (Stereo/Mono)

(REC MODE SW 6)

Select either stereo recording or mono recording.

Choosing mono recording gives you recording times that are twice as long

as with stereo recording.

Procedure

Turn off the power of the AR-200.

Set the SW 6 REC MODE switch on the AR-200’s bottom panel.

OFF : MONO

ON : STEREO

Turn on the power of the AR-200.

* Use a narrow-tipped object to set the MODE switches to ON or OFF.

What is mono recording

In the case of mono recording, input the audio signal to the "MONO/L"

input jack. When audio signals are input simultaneously to the "MONO/L"

and "R" input jacks, L and R are mixed and recorded.

Line Thru Output

REC SW6: OFF (mono)

When audio signals are input to "MONO/L," output is from OUTPUT L and

R. When audio signals are input to "R," output is from OUTPUT R only.

When audio signals are input to both "MONO/L" and "R," solely the signals

input to "MONO/L" are output from OUTPUT L, while the "MONO/L" and

"R" signals are mixed and output from OUTPUT R.

REC SW6: ON (stereo)

Audio signals input to "MONO/L" are output from OUTPUT L, and audio

signals input to "R" are output from OUTPUT R.

What’s RDAC?

RDAC (Roland Digital Audio Coding) is a proprietary audio recording

standard from Roland.

It achieves high sound quality and also makes it possible to record for long times.

If You’re Not Sure About Which Grade and Mode to Choose

The optimal grade and mode vary according to the usage conditions,

including the connected equipment, recording source, sound quality, time,

and playback system.

The factory default settings are RDAC-Grade: LONG1; and RDAC-Mode: MODE1.

First, try recording and playback with these settings. In most cases, this

yields satisfactory sound quality.

AR-200_e.book 21 ページ２００３年７月１４日　月曜日　午後１時１１分

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

No comments

Roland AR-200 User Manual Page 21