Roland AR-200 User Manual download pdf (Page 4)

IMPORTANT NOTES

In addition to the items listed under “USING THE UNIT

SAFELY” on page 2-3, please read and observe the

following:

Power Supply

• Do not use this unit on the same power circuit with any

device that will generate line noise (such as an electric

motor or variable lighting system).

• The AC adaptor will begin to generate heat after long

hours of consecutive use. This is normal, and is not a

cause for concern.

• Before connecting this unit to other devices, turn off the

power to all units. This will help prevent malfunctions

and/or damage to speakers or other devices.

Placement

• This device may interfere with radio and television

reception. Do not use this device in the vicinity of such

receivers.

• To avoid possible breakdown, do not use the unit in a wet

area, such as an area exposed to rain or other moisture.

Maintenance

• For everyday cleaning wipe the unit with a soft, dry cloth

or one that has been slightly dampened with water. To

remove stubborn dirt, use a cloth impregnated with a

mild, non-abrasive detergent. Afterwards, be sure to wipe

the unit thoroughly with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of any

kind, to avoid the possibility of discoloration and/or

deformation.

Additional Precautions

• Unfortunately, it may be impossible to restore the contents

of data that was stored DATA card once it has been lost.

Roland Corporation assumes no liability concerning such

loss of data.

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

• Never strike or apply strong pressure to the display.

• When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you

will avoid causing shorts, or damage to the cable’s

internal elements.

• To avoid disturbing your neighbors, try to keep the unit’s

volume at reasonable levels. You may prefer to use

headphones, so you do not need to be concerned about

those around you (especially when it is late at night).

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

• Use a cable from Roland to make the connection. If using

some other make of connection cable, please note the

following precautions.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this

unit. The use of such cables can cause the sound level

to be extremely low, or impossible to hear. For infor-

mation on cable specifications, contact the manufac-

turer of the cable.

Before Using PC Cards

• Never attempt to remove a PC Card from the drive while

the drive is operating (the indicator is lit); damage could

result to both the card and the drive.

• Remove any disk from the drive before powering up or

down.

• To avoid the risk of malfunction and/or damage, insert

only PC Cards into the disk drive. Never insert any other

type of disk. Avoid getting paper clips, coins, or any other

foreign objects inside the drive.

Before Using Cards

Using DATA Cards

• Carefully insert the PC card all the way in—until it is

firmly in place.

• Unauthorized recording, distribution, sale, lending, public

performance, broadcasting, or the like, in whole or in part,

of a work (musical composition, video, broadcast, public

performance, or the like) whose copyright is held by a

third party is prohibited by law.

• Do not use this unit for purposes that could infringe on a

responsibility whatsoever with regard to any infringe-

ments of third-party copyrights arising through your use

of this unit.

PC card

Eject button

AR-200_e.book 4 ページ２００３年７月１４日　月曜日　午後１時１１分

1 2 3 4 5 6 7 8 9 ... 71 72

Comments to this Manuals

No comments

Roland AR-200 User Manual Page 4

Comments to this Manuals

Related products and manuals for Players Roland AR-200