Roland AR-200 User Manual download pdf (Page 29)

Controlling the AR-200 from an External Device (Control Input Connectors)

Applications

Connectors Used for Direct Play (Control I/O

Connector)

“1–9”: Inputting a control signal directly to the terminal with

the number corresponding to the phrase starts playback of

the phrase.

“10 (Stop)”: This stops phrase playback.

In addition to the connectors just described, shorting “11/12

(GND)” (ground) connectors enables “On.”

fig.inp-03

"Important Notes on Making Connections and Switching

the Power On and Off"

(p. 9)

Basic Operation of Direct Playback (Normal

Playback)

fig.inp-04

Playback:

Input a control signal to a Port, 1–9.

→

The phrase assigned to the Port is played back.

stopping:

Input a control signal to Port 10 (STOP).

→

Playback of the phrase is stopped.

Order of Priority

The control input pins have a priority order.

The priority order is as follows:

fig.inp-05

When a new high-priority control signal is input during

phrase playback, playback of the current phrase is stopped,

and playback of the specified phrase begins.

fig.inp-06

* If a control signal has a lower priority than that of the phrase

currently being played back, the specified phrase is not played

back.

Playback is repeated while the control signal is continuously

input.

fig.inp-07

AR-200 Settings

Selecting the Control Input Mode

Set the MODE switches on the AR-200’s bottom panel to

select “PLAYBACK BY CARD DATA” from the control input

modes (PLAYBACK BY CARD DATA/DIRECT

PLAYBACK/BINARY PLAYBACK/INTERVAL

PLAYBACK).

* You cannot achieve control input playback merely by

connecting a device to the port. Be sure to set the control input

mode and match the method used for connecting to the

connectors.

Procedure for Setting the Control Input Mode

Turn off the power of the AR-200.

Set the MODE switches on the AR-200’s bottom panel as

shown below.

SW1: OFF

SW2: OFF

Turn on the power of the AR-200.

* Use a pointed object to change the ON/OFF settings of the

MODE switches.

Assigning Phrases to the Terminals

Assign phrases 1 through 9 to Port Nos. 1 through 9.

Settings in Effect When a Card Is Formatted

fig.inp-13

10 1

Select a Phrase

STOP

12 11

GND

0002

AUDIO OUTPUT

Port NO. 1

Port NO. 2

STOP Port

0001

0001 Interrupted

0001 > 0002 > 0003 ........> 0009

HIGH LOW

0002 0001

0002 Interrupted

AUDIO OUTPUT

Port NO. 1

Port NO. 2

AUDIO OUTPUT

Port NO. 1

0001 0001 0001

0001

0002

0003 0004

0005

0009

Port No.

Phrase

AR-200_e.book 29 ページ２００３年７月１４日　月曜日　午後１時１１分

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Comments to this Manuals

No comments

Roland AR-200 User Manual Page 29

Comments to this Manuals

Related products and manuals for Players Roland AR-200