Roland VS-300 User Manual Page 72
- Page / 115
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
70
4. A wide variety of Operations
Aligning Manually
Depending on the type of media, it may not be possible to detect crop marks automatically. When crop marks cannot be
detected automatically, you perform alignment manually.
1
Set the location of the origin point. Use the ar-
row keys to move the center of the blade to the
position above the lower-right crop mark.
2
Press the [BASE POINT] key.
The [BASE POINT] light lights up.
The location where the BASE POINT is set is displayed.
3
Use the arrow keys to align the center of the
blade with any of the align points (ALIGN POINT
1 through ALIGN POINT 3), then press and hold
the [BASE POINT] key for one second or longer.
4
When the screen shown in the figure appears,
press the [ENTER] key.
The align point is set.
You can make settings for up to three align points. Change the number of points set with [ALIGN POINT] as required.
The locations on the media of ALIGN POINT 1 through ALIGN POINT
3 are fixed. The machine automatically determines from the location
of the BASE POINT setting which align point or points have been set.
The screen display the number of each align point that has been set.
For information about the location of align points, see the previous
section, "Printing with Crop Marks."
The ALIGN POINT settings cannot be made unless the BASE POINT has been set.
Setting the BASE POINT after setting ALIGN POINTs clears all the previously set ALIGN POINTs.
Align the center of the
blade with this location.
This screen shows BASE POINT
and ALIGN POINT 1 are set.
Align the center of the
blade with this location.
Center of the blade
SETTING
ALIGN POINT 1
W 500 mm
B 1
W 500 mm
B
4-5 Reloading the Media and Performing Cutting
ALIGN POINT 3
ALIGN POINT 2
ALIGN POINT 1
BASE POINT
W 500 mm
B 1 2 3
- USER’S MANUAL 1
- For the USA 2
- For Canada 2
- Contents 3
- NERGY STAR 5
- Features of the SP-300 6
- To Ensure Safe Use 7
- Avis sur les avertissements 12
- À propos des symboles 12
- 1. Getting Started 17
- 1-1 Checking Accessories 18
- 1-2 Names and Functions 19
- 1. Getting Started 20
- 1-3 Assembling and Installing 21
- Step 1: Assemble the Stand 22
- Step 7: Fill Ink 30
- Filling Ink 31
- Step 9: Install the Blade 33
- 2. Basic Operation 35
- Switching On the Power 36
- 2-2 Menu Operations 38
- Basic Menu Operations 39
- 2-3 Loading Media 40
- Loading Sheet Media 43
- Types of Media Clamps 44
- Attaching the Media Clamps 44
- Removing the Media Clamps 45
- Using the Long Media Clamps 45
- Setting the Media Clamps 46
- 2-4 Heater Operation 47
- 3. Performing Output 49
- Setting Cutting Conditions 52
- 3-2 Performing Output 54
- 3-3 Separating the Media 56
- Stopping Printing or Cutting 57
- To Resume Printing or Cutting 57
- Setting the Start Location 61
- Feed Correction 62
- Bidirectional Correction 64
- Saving an Adjustment Value 66
- Loading an Adjustment Value 66
- Adjusting the Blade Extension 67
- Adjusting Automatically 68
- Adjusting Manually 69
- Printing with Crop Marks 70
- Aligning Automatically 71
- Aligning Manually 72
- 5. Maintenance 75
- Replacing an Ink Cartridge 77
- Cleaning the Printing Heads 78
- Before Starting Cleaning 80
- After Finishing Cleaning 84
- 5-3 Other Cleaning Tasks 85
- Replacing the Wiper 86
- How to Replace the Blade 88
- 5-6 When Moving the Unit 91
- 6-1 Menu Flowchart 94
- To the [CLEANING] menu 95
- To the [WIPER REPLACE] menu 95
- Main Menu 99
- 6. About the Menus 100
- Cutting Configuration Menu 101
- Heater Configuration Menu 102
- Language/unit Menu 102
- Maintenance Menu 102
- 7. What to Do If 103
- 7-1 What to Do If 104
- ADJ.] something other 105
- The Media Becomes Jammed 106
- 7-2 Responding to a Message 107
- 8. Appendix 109
- 8-1 Specifications 110
- 8-2 Usable Media 111
- 8-3 Printing or Cutting Area 112
- 8-4 About Blade Life 114
- R3-031201 115
Related products and manuals for Print & Scan Roland VS-300
Print & Scan Roland SJ-740 User Manual
(128 pages)
(128 pages)
Print & Scan Roland PNC-900 User Manual
(31 pages)
(31 pages)
Print & Scan Roland PC-600 User Manual
(6 pages)
(6 pages)
Print & Scan Roland SJ-500 User Manual
(26 pages)
(26 pages)
Print & Scan Roland SJ-740 User Manual
(97 pages)
(97 pages)
Print & Scan Roland Metaza MPX-80 User Manual
(120 pages)
(120 pages)
Print & Scan Roland Modela MDX-40 Specifications
(102 pages)
(102 pages)
Print & Scan Roland SJ-600 User Manual
(77 pages)
(77 pages)
Print & Scan Roland SJ-745EX User Manual
(4 pages)
(4 pages)
Print & Scan Roland CJ-540 User Manual
(124 pages)
(124 pages)
Print & Scan Roland FJ-400 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.350 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals