Roland MKS-900 User Manual download pdf (Page 20)

MUSIC PRODUCTION GUIDE

January 2011

• Press [SF3] REV to get to the Reverb effect

display

• Move the cursor to the parameter „Type“

• Select and try different types of the Reverb effect

In case you want to go into the depths of the effect

programming, you can use the cursor button > to get

to additional displays with the effect‘s parameters.

Since the Chorus effect has a minor role for drum

sounds, I willingly neglect it here.

Effect sends

You can set different send levels for each of the Drum

Kit‘s instruments:

•Press[F2]VOICEand[SF1]SELECT

•SelecttheSOURCEdisplaybypressing[SF5]

•Selectthesourceyouwouldliketoalteritssend

levelsetting

•Press[SF2]OUT-TUNE-hereyouwillndthe

sendlevelsforReverb,Chorus,andVariation

You can also set the send levels from the INPUT

display. In this case the send levels are set for a Voice

Set. Therefore the values of the effect sends are not

numeric values but offset controls. The center position

corresponds to the parameter settings in the SOURCE

display. Turning the knob to the left reduces the preset

values, turning it to the right increases them.

Master Effect and Master EQ

The Master effect offers the possibility to make the

sound of a Drum Kit even more powerful. Here the

effect type „Compressor“ plays a major role.

The Master effect is available in [UTILITY] → [F3]

→ [SF2] MEF.

Each one of the several types feature some presets to

select.

The overall sound can also be affected with the

MASTER EQ.

The EQ can be found in [UTILITY] → [F3] →

[SF2] MEQ.

Your own settings can be saved with STORE and will

then maintain in the device even after turning it off.

PeterKrischker

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Roland MKS-900 User Manual Page 20