Roland UA-30 Owner's Manual download pdf (Page 22)

UA-30 Application Guide

This chapter explains various ways in which the UA-30 can be connected and used.

Digitally recording the output of the

UA-30 on MD or DAT

Make the connections shown in the following diagram.

fig.03-01.e

* Audio data of a sampling rate identical to the setting of the “Sample rate select

switch” will be recorded with no loss of quality. Audio data of a sampling rate other

than the setting of the “Sample rate select switch” will be automatically

converted within Windows 98 to the rate specified by the “Sample rate select

switch”, and will be output from the digital output connectors of the UA-30.

UA-30

Provide separately as

suitable for your equipment.

When using a coaxial cable

to make connections, connect

it to the UA-30's

"COAXIAL OUT" connector.

LINE IN

LINE

OUT

OPTICAL

OUT

DIGITAL INPUT

MD / DAT

Monitor speakers

Signal flow

Stereo

Headphones

Computer

USB

port

USB

port

USB cable

Optical digital cable

Audio cable

You must set this to match

the sample rate of the device

(MD/DAT) connected to

the digital output.

If you change the position

of the Sample rate select

switch or the Recording

input select switch, you

must first exit all

applications including the

UA-30 D-Out Smoother

(p. 37). You should also

turn down the volume of

any audio amp system

that is connected.

Depending on the

application that you are

using, when the digital

output of the UA-30 is

connected to a digital

device such as MD or DAT

and audio is playing, a

certain amount of time may

e required immediately

after playback ends for the

digital audio output to be

locked, so that there will be

no sound for one or two

second, or the tempo or

pitch may be wrong. If this

occurs, you can use the

“UA-30 D-Out Smoother”

software included in the

CD-ROM to make the

audio sound smoothly. For

details refer to

“Basic

operation of the UA-30

D-Out Smoother”

(p. 37).

The signal that is input to

the digital input connector

of the UA-30 will not be

directly output from its

digital output connector.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Comments to this Manuals

No comments

Roland UA-30 Owner's Manual Page 22

Comments to this Manuals