Roland RD-700 User Manual download pdf (Page 78)

Detailed Settings for Each Function ([EDIT])

Edit Mode

Making Reverb Settings

Reverb adds the reverberation characteristics of halls or

auditoriums. Four different types are offered, so you can

select and use the type that suits your purpose.

You can set the amount of reverb applied separately for each

individual part (p. 80).

Reverb Type

When you change the Reverb Type, the Reverb parameters

will be automatically adjusted to the optimal values. Rather

than setting the reverb parameters one by one, you can make

the settings more easily by first setting the Reverb Type and

then changing only the necessary parameters.

Some Reverb Type settings have parameters that cannot be

set. Parameters that cannot be changed are indicated by “—

—–.”

Reverb Pre-Delay

Adjust the time delay from when the direct sound begins

until the reverb sound is heard.

The delay time increases as the value is raised.

Values:

0.0–100.0

Reverb Time

Adjust the time length of reverberation.

The reverberation becomes longer as the value is increased.

Values:

0–127

Reverb High Cut Frequency

This sets the frequency above which the high-frequency

content of the reverb will be reduced. If you do not wish to

cut the high range of the returned sound, select BYPASS.

Values:

160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600,

2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12500,

BYPASS

<Other Prm>, Value

You can make more detailed reverb settings.

When Other Prm is selected, the indication of the

corresponding Value changes, and the value is set.

Refer to

“REVERB”

(p. 134).

Setting Chorus and Delay

Chorus adds depth and spaciousness to the sound. You can

select whether to use this as a chorus effect or a delay effect.

You can set the amount of chorus applied separately for each

Tone (p. 80).

Chorus/Delay

You can select whether to use this as a chorus effect or a

delay effect.

Values:

Chorus, Delay

When Chorus/Delay is Set to Chorus

Chorus Pre-Delay

Specifies the delay time from the original sound until when

the chorus sound is heard.

The delay time increases as the value is raised.

Values:

0.0–100.0

Chorus Rate

Specifies the modulation frequency of the chorus sound.

The interval between undulations is shortened as this value

is increased.

Values: 0.05–10.00

Parameter

Value Description

Reverb

Type

OFF Reverb is not used.

REVERB Normal Reverb

SRV ROOM

Simulates the reverbera-

tion of room interiors. It

produces a well-defined

and spacious reverbera-

tion.

SRV HALL

Simulates the reverbera-

tion exhibited by hall. It

provides a deeper rever-

beration than the Room

reverbs.

SRV PLATE

Simulates a plate reverb

unit (a type of artificial re-

verb that utilized a metal

plate).

RD-700_e.book 78 ページ２００４年４月２６日　月曜日　午前１１時５４分

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 171 172

Comments to this Manuals

No comments

Roland RD-700 User Manual Page 78

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland RD-700