Roland Digital Piano FP-7F User Manual download pdf (Page 20)

● 0107: Speaker Simulator

Simulates the speaker type and mic settings used to record the speaker sound.

No Parameter Value Description

1 Speaker Type #1 0-15 (See the table.) Type of speaker

2 Mic Setting 0-2 1, 2, 3

Adjusts the location of the mic that

is recording the sound of the

speaker.

This can be adjusted in three steps,

with the mic becoming more

distant in the order of 1, 2, and 3.

3 Mic Level 0-127 0-127 Volume of the microphone

4 Direct Level 0-127 0-127 Volume of the direct sound

5 Level #2 0-127 0-127 Output Level

Specifications of each Speaker Type

The speaker column indicates the diameter of each speaker unit (in inches) and

the number of units.

Type Cabinet Speaker Microphone

Small 1 Small open-back enclosure 10 Dynamic

Small 2 Small open-back enclosure 10 Dynamic

Middle Open back enclosure 12 x 1 Dynamic

JC-120 Open back enclosure 12 x 2 Dynamic

Built-In 1 Open back enclosure 12 x 2 Dynamic

Built-In 2 Open back enclosure 12 x 2 Condenser

Built-In 3 Open back enclosure 12 x 2 Condenser

Built-In 4 Open back enclosure 12 x 2 Condenser

Built-In 5 Open back enclosure 12 x 2 Condenser

BG Stack 1 Sealed enclosure 12 x 2 Condenser

BG Stack 2 Large sealed enclosure 12 x 2 Condenser

MS Stack 1 Large sealed enclosure 12 x 4 Condenser

MS Stack 2 Large sealed enclosure 12 x 4 Condenser

Metal Stack Large double stack 12 x 4 Condenser

2-Stack Large double stack 12 x 4 Condenser

3-Stack Large triple stack 12 x 4 Condenser

● 0114: Guitar Amp Simulator

This is an effect that simulates the sound of a guitar amplifier.

No Parameter Value Description

1 Pre Amp Sw 0-1 Off, On Turns the amp switch on/off.

2 Pre Amp Type #1 0-13

JC-120,

Clean Twin,

MATCH Drive,

BG Lead,

MS1959I,

MS1959II,

MS1959I+II,

SLDN Lead,

Metal 5150,

Metal Lead,

OD-1,

OD-2 Turbo,

Distortion,

Fuzz

Type of guitar amp

3 Pre Amp Volume 0-127 0-127

Volume and amount of distortion of

the amp

4 Pre Amp Master 0-127 0-127 Volume of the entire pre-amp

5 Pre Amp Gain 0-2

Low, Middle,

High

Amount of pre-amp distortion

6 Pre Amp Bass 0-127 0-127

7 Pre Amp Middle 0-127 0-127

8 Pre Amp Treble 0-127 0-127

Tone of the bass/mid/treble

frequency range

Middle cannot be set if “MATCH

Drive” is selected as the Pre Amp

Type.

9 Pre Amp Presence 0-127

0-127 (MATCH

Drive: -127-0)

Tone for the ultra-high frequency

range

10 Pre Amp Bright 0-1 Off, On

Turning this “On” produces a

sharper and brighter sound.

This parameter applies to the

“JC-120,” “Clean Twin,” and “BG

Lead” Pre Amp Types.

11 Speaker Sw 0-1 Off, On

Determines whether the signal

passes through the speaker (ON),

or not (OFF).

12 Speaker Type #2 0-15 (See the table.) Type of speaker

13 Mic Setting 0-2 1, 2, 3

Adjusts the location of the mic

that’s capturing the sound of the

speaker.

This can be adjusted in three steps,

from 1 to 3, with the mic becoming

more distant as the value

ncreases.

14 Mic Level 0-127 0-127 Volume of the microphone

15 Direct Level 0-127 0-127 Volume of the direct sound

16 Pan 0-127 L64 - 63R Stereo location of the output

17 Level 0-127 0-127 Output level