Roland Digital Piano FP-7F User Manual download pdf (Page 26)

● 012d: Rotary2

This type provides modified response for the rotary speaker, with the low end

boosted further.

This effect is a descendant of the Roland VK Series’ built-in rotary speaker.

No Parameter Value Description

1 Speed #1 0-1 Slow, Fast

Rotational speed of the rotating

speaker

2 Brake #2 0-1 Off, On

Switches the rotation of the rotary

speaker. When this is turned on, the

rotation will gradually stop. When it

is turned off, the rotation will

gradually resume.

3 Woofer Slow Speed 1-127 0.05-10.00 Hz

Low-speed rotation speed of the

woofer

4 Woofer Fast Speed 1-127 0.05-10.00 Hz

High-speed rotation speed of the

woofer

5 Woofer Trans Up 0-127 0-127

Adjusts the rate at which the woofer

rotation speeds up when the

rotation is switched from Slow to

Fast.

6 Woofer Trans Down 0-127 0-127

Adjusts the rate at which the woofer

rotation speeds up when the

rotation is switched from Fast to

Slow.

7 Woofer Level 0-127 0-127 Volume of the woofer

8 Tweeter Slow Speed 1-127 0.05-10.00 Hz

9 Tweeter Fast Speed 1-127 0.05-10.00 Hz

10 Tweeter Trans Up 0-127 0-127

11 Tweeter Trans Down 0-127 0-127

12 Tweeter Level 0-127 0-127

Settings of the tweeter The

parameters are the same as for the

woofer.

13 Spread 0-10 0-10

Sets the rotary speaker stereo

image.

The higher the value set, the wider

the sound is spread out.

14 Low Gain 0-30 -15 - +15 dB Gain of the low range

15 High Gain 0-30 -15 - +15 dB Gain of the high range

16 Level 0-127 0-127 Output Level

● 0300: Rotary Multi

This is an effect combining the VK series internal effect with an organ effect

with the same features.

It comprises vibrato/chorus, overdrive, and rotary effects.

No Parameter Value Description

1 Vib/Cho Switch 0-1 Off, On

Switches the vibrato and chorus

effects

Vibrato and chorus effect types

V-1, V-2, V-3: Adds a wavering

(vibrato) that is created by

changes in the pitch.

The effect deepens as the value is

increased

2 Vib/Cho Type 0-5

V-1, V-2, V-3,

C-1, C-2, C-3

C-1, C-2, C-3: Adds a fullness and

breadth (chorus) to the sound.The

effect deepens as the value is

increased.

3 Vib/Cho Vintage 0-2 ‘50, ‘60, ‘70

This reproduces the subtle

differences in the vibrato and

chorus effects in organs built in

different years.

4 Vib/Cho Level 0-127 0-127 Vibrato/chorus effect volume

5 OD Switch 0-1 Off, On Switches the overdrive effect

6 OD Drive #2 0-127 0-127 Amount of distortion

7 OD Level 0-127 0-127 Overdrive effect volume

8 Rotary Switch 0-1 Off, On Switches the rotary effect

9 Rotary Speed #1 0-1 Slow, Fast

Low- and high-frequency rotation

speeds (Rate) Slow: (Slow Rate)

Fast: (Fast Rate)

10 R-Wf Slow Sp 1-127 0.05-10.00 Hz

Rate with low-frequency rotor set to

Slow rate

11 R-Wf Fast Sp 1-127 0.05-10.00 Hz

Rate with low-frequency rotor set to

Fast rate

12 R-Wf Accel 0-15 0-15

Speed at which the low-frequency

rotor’s rotation rate changes when

the rotation speed is switched

13 R-Wf Level 0-127 0-127 Low-frequency rotor volume

14 R-Tw Slow Sp 1-127 0.05-10.00 Hz

15 R-Tw Fast Sp 1-127 0.05-10.00 Hz

16 R-Tw Accel 0-15 0-15

17 R-Tw Level 0-127 0-127

High-frequency rotor setting This

parameter is the same as that for

the low-frequency rotor.

18 Rotary Separat 0-127 0-127 Amount of breadth in the sound

19 Rotary Level 0-127 0-127 Output volume

● 015b: Stereo Delay1

This is a stereo delay.

No Parameter Value Description

1 Delay Left Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Delay Left 0-127 0-1270 ms

Adjusts the time until the delay

sound is heard. (Hz)

3 Delay Left 0-21 note

Adjusts the time until the delay

sound is heard. (note)

4 Delay Right Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

5 Delay Right 0-127 0-1270 ms

Adjusts the time until the delay

sound is heard. (Hz)

6 Delay Right 0-21 note

Adjusts the time until the delay

sound is heard. (note)

7 Phase Left 0-1

8 Phase Right 0-1

Normal,

Inverse

Phase of the delay sound

9 Feedback Mode 0-1 Normal, Cross

Selects the way in which delay

sound is fed back into the effect.

(See the figures above.)

10 Feedback #1 49-89 0 - +80%

Adjusts the amount of the delay

sound that’s fed back into the

effect.

11 HF Damp 0-17

200-8000 Hz,

Bypass

Adjusts the frequency above which

sound fed back to the effect is

filtered out. If you don’t want to

filter out any high frequencies, set

this parameter to Bypass.

12 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

13 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

14 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the delay sound (W)

15 Level 0-127 0-127 Output level

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Comments to this Manuals

No comments

Roland Digital Piano FP-7F User Manual Page 26

Comments to this Manuals

Related products and manuals for The input devices Roland Digital Piano FP-7F