Roland Digital Piano FP-7F User Manual download pdf (Page 22)

● 0127: 3D Flanger

This applies a 3D effect to the flanger sound. The flanger sound will be

positioned 90 degrees left and 90 degrees right.

No Parameter Value Description

1 Filter Type 0-2 Off, Lpf, Hpf

Type of filter

Off: No filter is used

Lpf: Cuts the frequency range

above the Cutoff Freq

Hpf: Cuts the frequency range

below the Cutoff Freq

2 Cutoff Freq 0-16 200-8000 Hz Basic frequency of the filter

3 Pre Delay 0-125 0.0-100.0 ms

Adjusts the delay time from when

the direct sound begins until the

flanger sound is heard.

4 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

5 Rate #1 1-127 0.05-10.00 Hz Frequency of modulation (Hz)

6 Rate 0-21 note Frequency of modulation (note)

7 Depth #2 0-127 0-127 Depth of modulation

8 Phase 0-90 0-180 deg Spatial spread of the sound

9 Feedback 0-98 -98.98

Adjusts the proportion of the

flanger sound that is fed back into

the effect.

Negative (-) settings will invert the

phase.

10 Output Mode 0-1

Speaker,

Phones

Adjusts the method that will be

used to hear the sound that is

output to the OUTPUT jacks. The

optimal 3D effect will be achieved

if you select Speaker when using

speakers, or Phones when

using headphones.

11 Low Gain 0-30 -15 - +15 dB Gain of the low range

12 High Gain 0-30 -15 - +15 dB Gain of the high range

13 Balance 0-100

D100:0 -

WD0:100W

Volume balance between the direct

sound (D) and the flanger sound

(W)

14 Level 0-127 0-127 Output Level

● 0128: 2Band Flanger

A flanger that lets you apply an effect independently to the low-frequency and

high-frequency ranges.

No Parameter Value Description

1 Split Freq 0-16 200-8000 Hz

Frequency at which the low and

high ranges will be divided

2 Low Pre Delay 0-125 0.0-100.0 ms

Delay time from when the original

sound is heard to when the low-

range flanger sound is heard

3 Low Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

4 Low Rate #1 1-127 0.05-10.00 Hz

Rate at which the low-range flanger

sound is modulated (Hz)

5 Low Rate 0-21 note

Rate at which the low-range flanger

sound is modulated (note)

6 Low Depth 0-127 0-127

Modulation depth for the low-range

flanger sound

7 Low Phase 0-90 0-180 deg

Spaciousness of the low-range

flanger sound

8 Low Feedback 0-98 -98 - +98%

Proportion of the low-range flanger

sound that is to be returned to the

input (negative values invert the

phase)

9 High Pre Delay 0-125 0.0-100.0 ms

Delay time from when the original

sound is heard to when the

high-range flanger sound is heard

10 High Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

11 High Rate #2 1-127 0.05-10.00 Hz

Rate at which the high-range

flanger sound is modulated (Hz)

12 High Rate 0-21 note

Rate at which the high-range

flanger sound is modulated (note)

13 High Depth 0-127 0-127

Modulation depth for the

high-range flanger sound

14 High Phase 0-90 0-180 deg

Spaciousness of the high-range

flanger sound

15 High Feedback 0-98 -98 - +98%

Proportion of the high-range

flanger sound that is to be

returned to the input (negative

values invert the phase)

16 Balance 0-100

D100:0W -

D0:100W

Volume balance of the original

sound (D) and flanger sound (W)

17 Level 0-127 0-127 Output volume

● 0121: Auto Wah

Cyclically controls a filter to create cyclic change in timbre.

No Parameter Value Description

1 Filter Type 0-1 Lpf, Bpf

Type of filter

Lpf: The wah effect will be applied

over a wide frequency range.

Bpf: The wah effect will be applied

over a narrow frequency range.

2 Manual #2 0-127 0-127

Adjusts the center frequency at

which the effect is applied.

3 Peak 0-127 0-127

Adjusts the amount of the wah

effect that will occur in the range

of the center frequency. Set a

higher value for Q to narrow the

range to be affected.

4 Sens 0-127 0-127

Adjusts the sensitivity with which

the filter is controlled.

5 Polarity 0-1 Up, Down

Sets the direction in which the

frequency will change when the

autowah filter is modulated. Up:

The filter will change toward a

higher frequency. Down: The filter

will change toward a lower

frequency.

6 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

7 Rate #1 1-127 0.05-10.00 Hz Frequency of modulation (Hz)

8 Rate 0-21 note Frequency of modulation (note)

9 Depth 0-127 0-127 Depth of modulation

10 Phase 0-90 0-180 deg

Adjusts the degree of phase shift

of the left and right sounds when

the wah effect is applied.

11 Low Gain 0-30 -15 - +15 dB Gain of the low range

12 High Gain 0-30 -15 - +15 dB Gain of the high range

13 Level 0-127 0-127 Output Level

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comments to this Manuals

No comments

Roland Digital Piano FP-7F User Manual Page 22

Comments to this Manuals

Related products and manuals for The input devices Roland Digital Piano FP-7F