Roland Prelude User Manual download pdf (Page 63)

Cyclically modulates the stereo location of the sound.

fig.MFX-18a

This uses a 16-step sequence to vary the panning of the sound.

fig.MFX-19

By applying successive cuts to the sound, this effect turns a

conventional sound into a sound that appears to be played as a

backing phrase. This is especially effective when applied to sustain-

type sounds.

fig.MFX-20

18: AUTO PAN

Parameter Value Description

Mod Wave

TRI, SQR, SIN, SAW1,

SAW2

Modulation Wave

TRI: triangle wave

SQR: square wave

SIN: sine wave

SAW1/2: sawtooth wave

Rate 0.05–10.00 Hz, note Frequency of the change

Depth 0–127 Depth to which the effect is applied

Low Gain -15– +15 dB Gain of the low range

High Gain -15– +15 dB Gain of the high range

Level 0–127 Output Level

19: STEP PAN

Parameter Range Explanation

Step 01–16 L64–63R Pan at each step

Rate 0.05–10.00 Hz, note

Rate at which the 16-step sequence

will cycle

Attack 0–127

Speed at which the pan changes

between steps

Input Sync Sw OFF, ON

Specifies whether an input note

will cause the sequence to resume

from the first step of the sequence

(ON) or not (OFF)

Input Sync

Threshold

0–127

Volume at which an input note will

be detected

Level 0–127 Output volume

L in

R in

L out

R out

Auto Pan

2-Band EQ

Auto Pan

SAW1 SAW2

L in

R in

L out

R out

Step Pan

20: SLICER

Parameter Value Description

Step 01–16 L64–63R Level at each step

Rate

0.05–10.00

Hz, note

Rate at which the 16-step sequence will cy-

cle

Attack 0–127

Speed at which the level changes between

steps

Input Sync Sw OFF, ON

Specifies whether an input note will cause

the sequence to resume from the first step of

the sequence (ON) or not (OFF)

Input Sync

Threshold

0–127

Volume at which an input note will be detect-

Mode

LEGATO,

SLASH

Sets the manner in which the volume chang-

es as one step progresses to the next.

LEGATO: The change in volume from one

step’s level to the next remains unaltered.

If the level of a following step is the same

as the one preceding it, there is no

change in volume.

SLASH: The level is momentarily set to 0

before progressing to the level of the next

step. This change in volume occurs even

if the level of the following step is the

same as the preceding step.

Shuffle 0–127

Timing of volume changes in levels for even-

numbered steps (step 2, step 4, step 6...).

The higher the value, the later the beat

progresses.

Level 0–127 Output level

L in

R in

L out

R out

Slicer

Prelude_e.book Page 63 Wednesday, January 14, 2009 2:18 PM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 111 112

Comments to this Manuals

No comments

Roland Prelude User Manual Page 63

Comments to this Manuals

Related products and manuals for Digital pianos Roland Prelude