Roland V-1600HD Owner's Manual download pdf (Page 19)

Connecting External Equipment

Connect DVD players, video decks, and other equipment providing composite output to the SD IN connector. SD input is

assigned to channel 13.

* When connecting an output device equipped with RCA pin type connector to the composite input connector, use a BNC adapter plug.

fig.SD-connection.eps45

When 4:3 signal is input while OUTPUT FORMAT is set to 16:9 aspect ratio, the output is letterboxed. You can also use the menus to select

cropping or squeezing. Refer to “Menu Operations and Menu List” (p. 47).

When you connect a DVD player, video deck, or other equipment providing S-Video output to the SD IN connector, the settings

must be changed. SD input is assigned to channel 13, but by default, composite input is assigned to channel 13, and S-Video

input is not assigned. Use the menu operations described below to change the assignment. For more information about the

menus, refer to “Menu Operations and Menu List” (p. 47).

1. Display the INPUT menu.

Press the [INPUT] button to display the INPUT menu. The inputs assigned to the respective channels are displayed.

fig.press-input-button.eps

2. Display the channel.

Press the left and left/right [CURSOR] buttons to change the page and display [Ch. 13].

fig.ch13-display.eps

3. Change the assignment.

Press the up and down [CURSOR] buttons to choose [COMPOSITE]. Turn the [VALUE] dial to change the assignment from

[COMPOSITE] to [S-VIDEO]. After changing the assignment, press the [EXIT] button to exit the menu.

fig.S-Video-assign.eps

Connecting SD Analog Video Equipment (Composite)

Connecting SD Analog Video Equipment (S-Video)

DVD Player

1 ... 18 19 20 ... 68

No comments

Roland V-1600HD Owner's Manual Page 19