Roland V-1600HD Owner's Manual download pdf (Page 22)

Connecting External Equipment

3. Change the assignment.

Press the up and down [CURSOR] buttons to choose [RGB/COMPONENT]. Turn the [VALUE] dial to change the assignment from

[RGB/COMPONENT] to [DVI-D/HDMI]. Press the [EXIT] button to exit the menu.

* The settings for channels 11 and 12 change together Changing them independently is not possible.

fig.select-ch11.eps

Connect cameras or other playback devices that provide HDMI output to the DVI-D/HDMI IN connectors.

* When connecting an HDMI device, use an HDMI to DVI-D adapter cable.

fig.HDMI-connection.eps

By default, input to RGB/COMPONENT IN is assigned to channels 11 and 12, and input to DVI-D/HDMI is not assigned. Use the

menu operations described in the previous section, “Connecting a Computer (DVI-D)” to change the assignments.

* The V-1600HD does not support HDCP.

You can connect a source device for synchronizing.

* You can send (thru-out) the synchronizing signal from the THRU connector.

fig.BB-connection.eps

Connecting HDMI Equipment

Connecting Source Equipment for Synchronizing

1 ... 21 22 23 ... 68

No comments

Roland V-1600HD Owner's Manual Page 22