Roland V-1600HD Owner's Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
24
Connecting External Equipment
All input connectors on the V-1600HD include a thru-out (THRU) connector for connecting a source monitor. To send (thru-out)
input from RGB/COMPONENT IN, set the [TERMINATOR] switch for the respective thru-out connector to [OFF]. For termination at
the V-1600HD without thru-out, set the switch to [ON]. When the switch is set to [ON], the indicator next to the switch lights up.
fig.monitor-connection.eps
The V-1600HD is equipped with three D-Sub 15-pin TALLY connectors. Connecting a video monitor capable of tally input to these
makes it possible to illuminate the tally lamps on the monitor. The lamp is switched on and off according to the channel selection,
enabling you to see which channel is currently in use on the monitor.
* The V-1600HD uses open-collector TALLY connectors.
The channels shown below are assigned to the TALLY 1 to 3 connectors on V-1600HD by default.
fig.tally-assign.eps
You can use the menus to change the tally-output assignments. At the [SYSTEM] menu, use [Destination] to choose the connector
and pin number, then use [Signal] to choose the channel to output at the selected connector and pin. Refer to “Menu Operations
and Menu List” (p. 47).
Connecting a Source Monitor
Tally Output
12345
678910
1112131415
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin No. Channel
PGM Ch.1
PST Ch.1
NC
GND
PGM Ch.4
PGM Ch.2
PST Ch.2
NC
GND
PST Ch.4
PGM Ch.3
PST Ch.3
NC
GND
NC
TALLY 1 TALLY 2
TALLY 3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin No. Channel
PGM Ch.5
PST Ch.5
NC
GND
PGM Ch.8
PGM Ch.6
PST Ch.6
NC
GND
PST Ch.8
PGM Ch.7
PST Ch.7
NC
GND
NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin No. Channel
PGM Ch.9
PST Ch.9
NC
GND
PGM Ch.12
(DVI-D/HDMI)
PGM Ch.10
PST Ch.10
NC
GND
PST Ch.12
(DVI-D/HDMI)
PGM Ch.11 (DVI-D/HDMI)
PST Ch.11 (DVI-D/HDMI)
NC
GND
NC
Female Connector
Page view 23
1 ... 23 24 25 ... 68

Comments to this Manuals

No comments