Roland PC-12 Specifications download pdf (Page 72)

Part 6 Maintenance

Cleaning the Cleaning Pads

If the cleaning pads becomes dirty, clean them gently using a commercially available brush (made of hair or a similar soft material) or the

like.

Wipe away grime from the

media-feed rollers (metal

rollers) touching the small

rollers (shown in white in the

figure).

When you have finished cleaning, close the front cover

gently while supporting the left and right sides of the cover

with your hands.

While the [error] light is flashing, press the [ready/insert]

button.

The carriage moves to the left.

Use a cotton swab moistened with rubbing alcohol (ethyl

alcohol) to wipe away grime from the media-feed rollers

(metal rollers) that touch the small rollers. You may need to

repeat the process several times to remove stubborn grime.

Be careful not to get any alcohol on the platen.

After cleaning, allow alcohol to dry before you attempt printing.

Press and release the [ready/insert] button to rotate the

media-feed rollers slightly. Use the same method to wipe

dirty areas on the media-feed rollers using a cotton swab

moistened with rubbing alcohol (ethyl alcohol).

To return the PC-12 to its initial state, press the [power]

button to switch off the power.

Remove any loaded media at this time.

Press the [power] button to turn on the power.

The [power] light and [ready] light illuminate.

Press the front-cover eject button, catching the front cover

with your hand, and open the cover gently.

NOTICE

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 96 97

No comments

Roland PC-12 Specifications Page 72