Roland HPD-15 User Manual Page 43
- Page / 116
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
43
Chapter 2 Modifying a Patch
Chapter 2
Sustainer
The Sustainer restrains loud levels and boosts low levels,
making the sound more consistent and sustaining the sound.
Attack: 0–127 LFO, Ctrl1
Adjusts the attack time of an input sound.
Sustain: 0–127 Ctrl2
Adjusts the degree of boost.
Pan: L63–Center–R63 Ctrl3
Adjusts the stereo location of the output sound.
TotalLevel: -15–+15dB RTM
Adjusts the output level.
Overdrive
This effect creates a soft distortion similar to that produced
by vacuum tube amplifiers.
Drive: 0–127 RTM, LFO, Ctrl1
Adjusts the degree of distortion. The volume will change
together with the degree of distortion.
Character: 1–4
Selects the character of distortion. Increasing the value will
make more sound pressure.
Pan: L63–Center–R63 Ctrl2
Adjusts the stereo location of the output sound.
Distortion
This effect produces a more intense distortion than
Overdrive.
Drive: 0–127 RTM, LFO, Ctrl1
Adjusts the degree of distortion. The volume will change
together with the degree of distortion.
Character: 1–4
Selects the character of distortion. Increasing the value will
make more sound pressure.
Pan: L63–Center–R63 Ctrl2
Adjusts the stereo location of the output sound.
- Owner’s Manual 1
- IMPORTANT NOTES 4
- Contents 5
- Features 8
- How To Use This Manual 9
- Panel Descriptions 10
- Rear Panel 11
- Chapter 1 Quick Start 13
- Listening to the Demo Song 14
- Performing 15
- P01 LATIN 17
- 01 Conga 17
- P02 AFRICAN 17
- 01 TalkingDrm 17
- P05 ORCH 18
- 01 Vibraphone 18
- A1* PITCH +600 19
- Distortion (Multi-Effects) 20
- U0101A* PAD SET 25
- Pitch +200cent 25
- Playing Back a Preset Pattern 26
- Tempo =100 27
- System Settings 28
- CONTROLLER 29
- DBEAM Sens 100 29
- 3 124, 5 30
- When you select the 31
- Try to Play the Conga 34
- Chapter 2 Modifying a Patch 35
- Adjusting Sounds 36
- Chapter 2 37
- Adding Cyclic Change to the 38
- Effect Settings 39
- U0101 MULTI-FX 40
- Type# Hall"A" 40
- Stereo Equalizer (Stereo EQ) 41
- Ring Modulator (RingModltr) 44
- Stereo Chorus (Stereo Cho) 44
- Tetra Chorus (TetraChorus) 45
- Tremolo Chorus (Tremolo Cho) 45
- Stereo Flanger (Stereo Fln) 46
- Step Flanger (StepFlanger) 47
- Stereo Delay (StereoDelay) 48
- Modulation Delay (Mod Delay) 49
- Advanced Reverb (AdvanceRev) 51
- Gate Reverb (GateReverb) 51
- Controlling the Tone 52
- Using a Pad to Start a 54
- Set the Volume of the Entire 54
- Settings for Other Functions 54
- Setting for MIDI 55
- Transmission 55
- Naming a Patch 55
- Saving Your Settings (Write) 56
- Duplicating Settings (Copy) 56
- Copying a Value to All Pads 58
- Using Realtime Modify to 58
- Adjust Values 58
- Basic Settings for Recording 59
- Settings for the Pattern 60
- Chapter 3 61
- Rehearsal Function 62
- Changing the Settings of 63
- Editing a Pattern 64
- Creating a Patch Chain 65
- (Chain Edit) 65
- Playing with a Patch Chain 66
- (Chain Play) 66
- Settings for basic operation 67
- Settings for the Controllers 69
- Turning On/Off the D Beam 69
- Turning On/Off the Ribbons 69
- Setting the Pad Sensitivity 70
- Chapter 5 71
- Settings for the Pedal 72
- P0606A3*PAD INST 72
- R70:13" Hi-Hat 72
- P0606PL*PAD INST 72
- PEDAL(A3) 72
- (see figure on p. 37) 74
- MIDI Settings 75
- Restoring Settings to Their 75
- Default Values (Factory 75
- Using the HPD-15 to Play 76
- External Instruments 76
- Setting the MIDI Channels 77
- Using the HPD-15 As a 78
- Sound Module 78
- Soft Thru OFF 79
- MIDI Instrument 80
- Saving Data to an External 80
- Receiving (Bulk Load) 81
- Setting the Device ID 82
- Program Change Number List 82
- (User Patches) 82
- Device ID 17 82
- Troubleshooting 83
- MIDI-related Problems 84
- Sequencer-related Problems 84
- Procedure for Factory Reset 85
- Messages and Error Messages 86
- Messages 87
- About MIDI 88
- How the Internal Sequencer 89
- Operates 89
- Preset Patch List 90
- Preset Pattern List 91
- Instrument List 92
- Pad Set Instrument List 94
- Backing Instrument List 94
- Effect Type List 95
- Demo Song List 96
- MIDI Implementation 100
- Appendices 101
- 2. Transmit data 101
- 3. Parameter address map 104
- (Model ID = 00H 2EH) 104
- 4. Bulk Dump 108
- 5. Supplementary material 108
- MIDI Implementation Chart 110
- Specifications 112
- USING THE UNIT SAFELY 115
© 2020, manymanuals.com. All rights reserved. | 2.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals