Roland HPD-15 User Manual Page 54
- Page / 116
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
54
Chapter 2 Modifying a Patch
Using a Pad to Start a
Pattern
You can play a sequencer pattern by striking a pad (B1–B5,
C1–C5).
Pads A1–A5, the D Beam, and the ribbon controllers can not
play patterns.
Parameter Category: PAD PTN
fig.2-23
PTN Number:
Selects a pattern. If a pattern is not selected, this will be
displayed as “OFF.”
* For pads A1–A5, the D-beam, and the ribbons, “---” will be
displayed, and a pattern cannot be selected.
If a pattern is selected, the indicator beside the pad will go
red. It will blink while the pattern is playing back.
* If you change the patch while a pattern is playing back, you
can stop the pattern by pressing [PLAY/STOP].
Tempo:
Sets the tempo of the pattern.
When using a pad to start a pattern, the tempo which is set to
the pattern (p. 60) is ignored.
* If you change the “PTN Number,” the tempo which is set to
the selected pattern will be set to the value of this parameter.
Level:
Adjusts the volume at which the pattern will sound.
For details on a pattern, refer to “Chapter 3 Recording Your
Performance (Sequencer)” (p. 59).
Set the Volume of the Entire
Patch
You can set the volume of the patch to adjust the volume
balance between patches.
Parameter Category: PATCH LEV
fig.2-24
MasterVolume: 0–127
Settings for Other Functions
Parameter Category: FUNC
Limiting the Resonance
You can set an upper limit for the resonance of the filter.
fig.2-25
Reso Limit: 50–126, OFF
If you select OFF, the tonal change produced by the filter will
be greater, but loud sounds may be produced unexpectedly.
Adjusting the Sensitivity of the
Pads
You can adjust the sensitivity of the pads as suitable for your
playing style.
fig.2-26
PadSnsType: Hand1–2, Fing1–2
If you are striking the pads with your hand, select Hand; if
with your fingers, select Fing. “2” is more sensitive than “1.”
If you are using sticks to strike the pad, select Fing1 or Fing2.
U0101B1 PAD PTN
PTN Number U01
U0101 PATCH LEV
MasterVolume 100
U0101 FUNC
Reso Limit 100
U0101 FUNC
PadSnsType Hand1
- Owner’s Manual 1
- IMPORTANT NOTES 4
- Contents 5
- Features 8
- How To Use This Manual 9
- Panel Descriptions 10
- Rear Panel 11
- Chapter 1 Quick Start 13
- Listening to the Demo Song 14
- Performing 15
- P01 LATIN 17
- 01 Conga 17
- P02 AFRICAN 17
- 01 TalkingDrm 17
- P05 ORCH 18
- 01 Vibraphone 18
- A1* PITCH +600 19
- Distortion (Multi-Effects) 20
- U0101A* PAD SET 25
- Pitch +200cent 25
- Playing Back a Preset Pattern 26
- Tempo =100 27
- System Settings 28
- CONTROLLER 29
- DBEAM Sens 100 29
- 3 124, 5 30
- When you select the 31
- Try to Play the Conga 34
- Chapter 2 Modifying a Patch 35
- Adjusting Sounds 36
- Chapter 2 37
- Adding Cyclic Change to the 38
- Effect Settings 39
- U0101 MULTI-FX 40
- Type# Hall"A" 40
- Stereo Equalizer (Stereo EQ) 41
- Ring Modulator (RingModltr) 44
- Stereo Chorus (Stereo Cho) 44
- Tetra Chorus (TetraChorus) 45
- Tremolo Chorus (Tremolo Cho) 45
- Stereo Flanger (Stereo Fln) 46
- Step Flanger (StepFlanger) 47
- Stereo Delay (StereoDelay) 48
- Modulation Delay (Mod Delay) 49
- Advanced Reverb (AdvanceRev) 51
- Gate Reverb (GateReverb) 51
- Controlling the Tone 52
- Using a Pad to Start a 54
- Set the Volume of the Entire 54
- Settings for Other Functions 54
- Setting for MIDI 55
- Transmission 55
- Naming a Patch 55
- Saving Your Settings (Write) 56
- Duplicating Settings (Copy) 56
- Copying a Value to All Pads 58
- Using Realtime Modify to 58
- Adjust Values 58
- Basic Settings for Recording 59
- Settings for the Pattern 60
- Chapter 3 61
- Rehearsal Function 62
- Changing the Settings of 63
- Editing a Pattern 64
- Creating a Patch Chain 65
- (Chain Edit) 65
- Playing with a Patch Chain 66
- (Chain Play) 66
- Settings for basic operation 67
- Settings for the Controllers 69
- Turning On/Off the D Beam 69
- Turning On/Off the Ribbons 69
- Setting the Pad Sensitivity 70
- Chapter 5 71
- Settings for the Pedal 72
- P0606A3*PAD INST 72
- R70:13" Hi-Hat 72
- P0606PL*PAD INST 72
- PEDAL(A3) 72
- (see figure on p. 37) 74
- MIDI Settings 75
- Restoring Settings to Their 75
- Default Values (Factory 75
- Using the HPD-15 to Play 76
- External Instruments 76
- Setting the MIDI Channels 77
- Using the HPD-15 As a 78
- Sound Module 78
- Soft Thru OFF 79
- MIDI Instrument 80
- Saving Data to an External 80
- Receiving (Bulk Load) 81
- Setting the Device ID 82
- Program Change Number List 82
- (User Patches) 82
- Device ID 17 82
- Troubleshooting 83
- MIDI-related Problems 84
- Sequencer-related Problems 84
- Procedure for Factory Reset 85
- Messages and Error Messages 86
- Messages 87
- About MIDI 88
- How the Internal Sequencer 89
- Operates 89
- Preset Patch List 90
- Preset Pattern List 91
- Instrument List 92
- Pad Set Instrument List 94
- Backing Instrument List 94
- Effect Type List 95
- Demo Song List 96
- MIDI Implementation 100
- Appendices 101
- 2. Transmit data 101
- 3. Parameter address map 104
- (Model ID = 00H 2EH) 104
- 4. Bulk Dump 108
- 5. Supplementary material 108
- MIDI Implementation Chart 110
- Specifications 112
- USING THE UNIT SAFELY 115
© 2020, manymanuals.com. All rights reserved. | 0.390 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals