Roland HPD-15 User Manual download pdf (Page 98)

MIDI Implementation

❍Expression (Controller number 11)

Status 2nd byte 3rd byte

BnH 0BH vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the data of the [LEVEL] knob.

* When recording, this is recorded in the sequencer data itself.

❍Effect Control 1 (Controller number 12)

Status 2nd byte 3rd byte

BnH 0CH vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the data of the [M-FX DEPTH] knob.

* When recording, this is recorded in the sequencer data itself.

❍General purpose controller 1 (Controller number 16)

Status 2nd byte 3rd byte

BnH 10H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the position data of the pad A1.

* When recording, this is recorded in the sequencer data itself.

❍General purpose controller 2 (Controller number 17)

Status 2nd byte 3rd byte

BnH 11H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the position data of the pad A5.

* When recording, this is recorded in the sequencer data itself.

❍Hold 1 (Controller number 64)

Status 2nd byte 3rd byte

nH 40H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

* When recording, this is recorded in the sequencer data itself.

❍Sostenuto (Controller number 66)

Status 2nd byte 3rd byte

BnH 42H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

* Only the pad part and the percussion parts can be received.

* If the value is 64 and over, the Modify Lock will be done. If the value is 63 and under, the

Modify Lock will be canceled.

* When recording, this is recorded in the sequencer data itself.

❍Soft (Controller number 67)

Status 2nd byte 3rd byte

BnH 43H 00H

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

* Only the pad part and the percussion parts can be received.

* When this message is received, the Modify Clear will be done.

* When recording, this is recorded in the sequencer data itself.

❍Sound Controller 1 (Controller number 70)

Status 2nd byte 3rd byte

BnH 46H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the data of the [SWEEP] knob.

* When recording, this is recorded in the sequencer data itself.

❍Sound Controller 5 (Controller number 74)

Status 2nd byte 3rd byte

BnH 4AH vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the data of the [COLOR] knob.

* When recording, this is recorded in the sequencer data itself.

❍Sound Controller 7 (Controller number 76)

Status 2nd byte 3rd byte

BnH 4CH vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the data of the [LFO RATE] knob.

* When recording, this is recorded in the sequencer data itself.

❍General purpose controller 6 (Controller number 81)

Status 2nd byte 3rd byte

BnH 51H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the position data of the d beam controller.

* When recording, this is recorded in the sequencer data itself.

❍General purpose controller 7 (Controller number 82)

Status 2nd byte 3rd byte

BnH 52H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the position data of the ribbon controller L.

* When recording, this is recorded in the sequencer data itself.

❍General purpose controller 8 (Controller number 83)

Status 2nd byte 3rd byte

BnH 53H vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the pad part and the percussion parts can be received.

* This is used as the position data of the ribbon controller R.

* When recording, this is recorded in the sequencer data itself.

❍Effect 1(Reverb Send Level) (Controller number 91)

Status 2nd byte 3rd byte

BnH 5BH vvH

n = MIDI channel number: 0H - FH (ch.1 - ch.16)

vv = Control value: 00H - 7FH (0 - 127)

* Only the percussion parts and the melody parts can be received.

* This is used as the part reverb send level of the sequencer pattern data.

* Not recorded in the sequencer.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 115 116

Comments to this Manuals

No comments

Roland HPD-15 User Manual Page 98

Comments to this Manuals