Roland UA-101 Owner's Manual download pdf (Page 27)

Basic connections and settings

This chapter explains basic connections and data flow for the UA-101. You

should also refer to the block diagram printed on the front cover as you read

this chapter.

* To prevent malfunction and/or damage to speakers or other equipment, you must

turn down the volume and turn off the power on all your equipment before you

connect anything to the UA-101.

* When connection cables with resistors are used, the volume level of equipment

connected to the inputs (Input jacks) may be low. If this happens, use connection

cables that do not contain resistors, such as those from the Roland PCS series.

Use a USB cable to connect the UA-101 to your computer.

Both MIDI data and audio data are transferred over the USB cable.

When you connect headphones or monitor speakers as shown in the diagram,

you’ll be able to monitor the playback from your software, or the sound of

instruments or audio devices connected to the UA-101.

fig.basic

Basic connections

AC adaptor

AC outlet

DC IN

Amplified speakers

Headphones

Turn ON if using

Hi-Speed USB mode

(USB 2.0)

Computer

USB

connector

UA-101_e.book 27 ページ２００６年１月１９日　木曜日　午後２時３８分

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

No comments

Roland UA-101 Owner's Manual Page 27