Roland RS-50 User Manual download pdf (Page 59)

Playing more than one sound simultaneously (Performance mode)

Performance Mode

Saving a performance

Use the following procedure to save a performance you’ve edited.

Press [WRITE].

Use VALUE [-]/[+] to specify the number (U1–U8) at which the

user performance is to be saved.

fig.r06-55_40

Be aware that if you choose a number in which a user

performance has already been saved, the previously saved

settings will be overwritten and lost.

Press [ENTER].

If you have edited patches for some parts, the following message

will appear.

fig.r06-55a_40

If you have not edited any of the patches in the performance, the

user performance has been saved and the display will indicate

“COMPLETED.”

If you want to save the edited patch, press [ENTER].

The display will indicate the part where the edited patch is used.

Use VALUE [-]/[+] to specify the number (U001–U128) at which

the user patch is to be saved.

fig.r06-55b_40

If you decide not to save the user patch, press [EXIT].

Be aware that if you choose a number in which a user patch has

already been saved, the previously saved settings will be

overwritten and lost.

Press [ENTER].

Use VALUE [-]/[+] to specify the category for the user patch

you want to save.

fig.r06-55c_40

For more about the category, refer to

“Patch categories”

(p. 49)

Press [ENTER] once again to execute.

When the patch has been saved, the display will indicate

“COMPLETED.”

If there are more patches that have been edited, the parts that

use such patches will be shown in a consecutive manner.

Repeat steps 3.–6.

Once all the necessary patches have been saved, you are

returned to the screen you were in at step 1.

fig.r06-55_40

Press [ENTER].

When the user performance has been saved, the display will indicate

“COMPLETED.”

If you decide not to save the user performance, press [EXIT].

If you do not change

“Name (Performance Name)”

(p. 56), the

performance will have the same name as the one you have been

editing.

Convenient functions for

performance editing

(Performance Utility)

Performance Utility provides various functions that you will find

convenient when editing performances, allowing you to do things

such as copy or initialize a performance.

Copying part or effect parameters

(PERFORM PRM COPY)

This operation copies the settings of a specified performance to the

current performance. By using this you can edit more efficiently. The

following four parameters can be copied. Effect-related parameters

can also be copied from a patch.

•

PART:

Copy settings made for each part (p. 56).

•

MFX:

Copy multi-effect settings.

•

CHORUS:

Copy chorus settings.

•

REVERB:

Copy reverb settings.

Copying settings made for each part of a

performance

Press [PERFORM] so it is lit and you are in Performance

mode.

Select the copy-destination performance.

Press [UTILITY].

Use PAGE/CURSOR [ ]/[ ] to select “1:PERFORM PRM

COPY.”

Press [ENTER].

Use VALUE [-]/[+] to select “PART.”

fig.r06-64_40

Press PAGE/CURSOR [ ].

Use VALUE [-]/[+] to select the copy-source performance.

fig.r06-65_40

RS-50_e3.book 59 ページ２００３年１１月７日　金曜日　午後７時１分

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 131 132

Comments to this Manuals

No comments

Roland RS-50 User Manual Page 59

Comments to this Manuals

Related products and manuals for Musical Instruments Roland RS-50