Roland RS-50 User Manual download pdf (Page 75)

Adding effects

Effects

18: LONG DELAY

This is useful when you want to apply a delay that is longer than 17:

St DELAY.

fig.MFX-18

19: MOD DELAY (Modulation Delay)

This effect adds modulation to the delayed sound, producing an

effect similar to a flanger.

When Feedback Mode is NORMAL:

fig.MFX-19a

When Feedback Mode is CROSS:

fig.MFX-19b

HF Damp

200–8000 [Hz],

BYPASS

Adjusts the frequency above

which sound fed back to the ef-

fect will be cut.

If you do not want to cut the

high frequencies of the feed-

back, set this parameter to BY-

PASS.

Low Gain -15– +15 [dB] Adjusts the gain of the low fre-

quency.

High Gain -15– +15 [dB] Adjusts the gain of the high fre-

quency.

Balance # D100:0W–

D0:100W

Adjusts the volume balance be-

tween the direct sound and the

delay sound.

With a setting of D100:0W only the

direct sound will be output, and

with a setting of D0:100W only the

delay sound will be output.

Level 0–127 Adjusts the output level.

Parameter

Value Description

Delay 0–840 [ms], note

Adjusts the time from the direct

sound until the delay sound is

heard.

Feedback # -98– +98 [%] Adjusts the proportion (%) of

the delay sound that is fed back

into the effect.

Negative (-) settings will invert

the phase.

HF Damp 200–8000 [Hz],

BYPASS

Adjusts the frequency above

which sound fed back to the ef-

fect will be cut.

If you do not want to cut the

high frequencies of the feed-

back, set this parameter to BY-

PASS.

Low Gain -15– +15 [dB] Adjusts the gain of the low fre-

quency.

High Gain -15– +15 [dB] Adjusts the gain of the high fre-

quency.

Balance # D100:0W–

D0:100W

Adjusts the volume balance be-

tween the direct sound and the

delay sound.

With a setting of D100:0W only the

direct sound will be output, and

with a setting of D0:100W only the

delay sound will be output.

Level 0–127 Adjusts the output level.

Parameter

Value Description

Feedback

Balance W

L in

R in

L out

R out

Delay

Balance D

2-Band

Parameter

Value Description

Feedback Mode

NORMAL,

CROSS

Selects the way in which delay

sound is fed back into the effect.

NORMAL: The left delay sound

will be fed back into the left de-

lay, and the right delay sound

into the right delay.

CROSS: The left delay sound

will be fed back into the right de-

lay, and the right delay sound

into the left delay.

Delay Left 0–370 [ms] Adjusts the time from the direct

sound until when the left delay

sound is heard.

Delay Right 0–370 [ms] Adjusts the time from the direct

sound until when the right delay

sound is heard.

Feedback -98– +98 [%] Adjusts the proportion (%) of

the delay sound that is fed back

into the effect.

Negative (-) settings will invert

the phase.

HF Damp 200–8000 [Hz],

BYPASS

Adjusts the frequency above

which sound fed back to the ef-

fect will be cut.

If you do not want to cut the

high frequencies of the feed-

back, set this parameter to BY-

PASS.

Rate # 0.05–10.00 [Hz] Adjusts the speed of the modu-

lation.

Depth 0–127 Adjusts the depth of the modu-

lation.

Phase 0–180 [deg] Adjusts the spatial spread of the

sound.

R in R out

L in L out

Feedback

Balance W

Balance D

Balance W

Balance D

2-Band

Delay

Modulation

R in

R out

L in

L out

Feedback

Balance W

Balance D

Balance W

Balance D

2-Band

Delay

Modulation

RS-50_e3.book 75 ページ２００３年１１月７日　金曜日　午後７時１分

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 131 132

Comments to this Manuals

No comments

Roland RS-50 User Manual Page 75

Comments to this Manuals

Related products and manuals for Musical Instruments Roland RS-50