Roland XP-60 Operations Instructions Page 197
- Page / 226
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
● Omni On (Controller number 125)
status 2nd byte 3rd byte
BnH 7DH 00H
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
* The same processing as when All Note Off is received will be done. The
instrument will not be set to OMNI ON.
* Not received in Performance mode if Rx Switch parameter (PERFORM/
MIDI/Part MIDI) is OFF.
● Mono (Controller number 126)
status 2nd byte 3rd byte
BnH 7EH mmH
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
mm=Mono number : 00H - 10H (0 - 16)
* The same processing as when All Note Off is received will be done, and the
Key Assign parameter (PATCH/Common/Common Control) will be set to
SOLO.
* Not received in Performance mode if Rx Switch parameter (PERFORM/
MIDI/Part MIDI) is OFF.
● Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
n=MIDI channel number : 0H - FH (ch.1 - ch.16)
* The same processing as when All Note Off is received will be done, and the
Key Assign parameter (PATCH/Common/Common Control) will be set to
POLY.
* Not received in Performance mode if Rx Switch parameter (PERFORM/
MIDI/Part MIDI) is OFF.
■ System Realtime messages
● Active Sensing
status
FEH
* When an Active Sensing message is received, the unit will begin monitoring
the interval at which MIDI messages are received. During monitoring, if
more than 420 ms passes without a message being received, the same
processing will be done as when All Sound Off, All Note Off, and Reset All
Controllers messages are received. Then monitoring will be halted.
■ System Exclusive messages
status data byte status
F0H iiH, ddH, ......, eeH F7H
F0H : System Exclusive message status
ii = ID number : This is the ID number (manufacturer ID) that spe-
cifies the manufacturer whose exclusive message
this is. Roland’s manufacturer ID is 41H.ID num-
bers 7EH and 7FH are defined in an expansion
of the MIDI standard as Universal Non-realtime
messages (7EH) and Universal Realtime
Messages (7FH).
dd,..., ee = data : 00H - 7FH (0 - 127)
F7H : EOX (End Of Exclusive)
Of the System Exclusive messages received by this device, the data of messa-
ges related to Mode settings and the Data Request (RQ1) messages will be set
automatically.
● System Exclusive messages related to Mode settings
These messages are used to initialize the instrument to GM mode, or to switch
from one mode to another mode.
“GM System On” and “GM System Off” use Universal Non-realtime message
format.
❍ GM System On
“GM System On” is a command message that resets the internal settings of
the instrument to the GM initial state (General MIDI System - Level 1). A GM
instrument that receives this message will automatically enter a state in which
it can correctly perform a GM score.
status
data byte status
F0H 7EH, 7FH, 09H, 01H F7H
Byte
Remarks
F0H Exclusive status
7EH ID number (Universal Non-realtime message)
7FH device ID (Broadcast)
09H sub ID#1 (General MIDI Message)
01H sub ID#2 (General MIDI On)
F7H EOX (End Of Exclusive)
* Not received when the Rx.GM-ON Message parameter (SYSTEM/MIDI/
MIDI Param 1) is OFF.
❍ GM System Off
When this messages is received, this instrument will return to the performan-
ce mode.
status
data byte status
F0H 7EH, 7FH, 09H, 02H F7H
Byte
Remarks
F0H Exclusive status
7EH ID number (Universal Non-realtime message)
7FH device ID (Broadcast)
09H sub ID#1 (General MIDI Message)
02H sub ID#2 (General MIDI Off)
F7H EOX (End Of Exclusive)
* Not received when the Rx.GM-ON Message parameter (SYSTEM/MIDI/
MIDI Param 1) is OFF.
● Data transmission
This instrument can use exclusive messages to exchange many varieties of
internal settings with other devices.
The model ID of the exclusive messages used by this instrument is 6AH.
❍ Data Request 1 RQ1
This message requests the other device to transmit data. The address and size
indicate the type and amount of data that is requested.
When a Data Request message is received, if the device is in a state in which it
is able to transmit data, and if the address and size are appropriate, the
requested data is transmitted as a Data Set 1 (DT1) message. If the conditions
are not met, nothing is transmitted.
status
data byte status
F0H
41H, dev, 6AH, 11H, aaH, bbH, ccH, ddH, ssH, ttH, uuH, vvH, sum
F7H
Byte
Remarks
F0H Exclusive status
41H ID number (Roland)
dev device ID (dev : 10H - 1FH)
6AH model ID (XP-60/XP-80)
11H command ID (RQ1)
aaH address MSB
bbH address
ccH address
ddH address LSB
ssH size MSB
ttH size
uuH size
vvH size LSB
sum checksum
F7H EOX (End Of Exclusive)
* The size of data that can be transmitted at one time is fixed for each type of
data. and data requests must be made with a fixed starting address and
size. Refer to the address and size given in “5. Parameter address map.”
(p.221)
* For the checksum, refer to page 227.
* This message is not received if the Rx.Sys.Excl parameter
(SYSTEM/MIDI/MIDI Param 1) is OFF.
* This message is not received in GM mode.
❍ Data Set 1 DT1
This message transmits the actual data, and is used when you wish to set the
data of the receiving device.
status
data byte status
F0H
41H, dev, 6AH, 12H, aaH, bbH, ccH, ddH, eeH, ... ffH, sum
F7H
217
Capítulo 12. Material suplementario
- MANUAL DEL USUARIO 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- SAVE THESE INSTRUCTIONS 2
- Apparatus containing 3
- Lithium batteries 3
- AAVVIISOO 4
- NOTAS IMPORTANTES 5
- Protect tab 6
- Write (writing permitted) 6
- Protect (writing prohibited) 6
- Prestaciones del XP-60/XP-80 7
- Resumen de Capítulos 8
- Contenido 9
- Panel Frontal 15
- I.Sección SEQUENCER 16
- Panel Laterall 17
- Panel Posterior 18
- Configuración Básica 19
- Performances 20
- Sets de Percusión 20
- Funcionamiento Básico 21
- Desplazar el cursor 24
- Modificar un valor 24
- Asignar un nombre 25
- Capítulo 2. Interpretar 27
- Interpretar en el modo 30
- Performance 30
- Asignar un Patch a una Parte 33
- (Paleta de Sonidos) 33
- Set de Percusión 34
- Hacer Sonar un arpegio 36
- Grabar un arpegio 38
- Desplazamiento de Octava) 38
- Transportar) 39
- Acerca de los efectos 40
- Editar un Patch 41
- Acerca de la edición de Tones 43
- Editar un Performance 44
- Editar un Set de Percusión 45
- Guardar un Sonido editado 46
- Pantalla Common General 47
- Pantalla Common Control 48
- Pantalla Structure 50
- Tiempo Delay 52
- Tiempo de 52
- Pantalla Pitch 53
- Pantalla Pitch Envelope 54
- Pantalla TVF Envelope 55
- Pantalla TVA Envelope 57
- Fuente de Control 59
- Aftertouch 59
- Pantalla Control Switch 60
- Pantalla EFX Param 64
- Pantalla EFX Control 64
- Pantalla Chorus 65
- Pantalla Reverb 65
- (Common) 66
- [PERFORM]➞[F1] (Common) 66
- [PERFORM]➞[F4] (MIDI) 68
- [PERFORM]➞[F5] (Effects) 69
- [PERFORM]➞[F6] (Info) 70
- Pantalla Ryhthm Set Name 71
- Pantalla Wave 71
- [RHYTHM]➞[F3] (Key TVF) 72
- Bend Range (Gama del Bender) 73
- Mute Group (Enmudecer Grupo) 73
- Percusión (Effects) 74
- [RHYTHM]➞[F5] (Key Ctl) 74
- ELos tipos de efectos EFX 75
- 4: PHASER 76
- 5: SPECTRUM 76
- 6: ENHANCER 76
- 7: AUTO-WAH 77
- 8: ROTARY 77
- 9: COMPRESSOR 77
- 10: LIMITER 78
- 11: HEXA-CHORUS 78
- 12: TREMOLO-CHORUS 78
- 13: SPACE-D 79
- 14: STEREO-CHORUS 79
- 15: STEREO-FLANGER 79
- 16: STEP-FLANGER 80
- 17: STEREO-DELAY 80
- 18: MODULATION-DELAY 81
- 19: TRIPLE-TAP-DELAY 82
- 20: QUADRUPLE-TAP-DELAY 82
- 21: TIME-CONTROL-DELAY 83
- 22: 2VOICE-PITCH-SHIFTER 83
- 24: REVERB 84
- 25: GATE-REVERB 85
- 26: OVERDRIVE ➞ CHORUS 85
- 27: OVERDRIVE ➞ FLANGER 85
- 28: OVERDRIVE ➞ DELAY 86
- 29: DISTORTION ➞ CHORUS 86
- 30: DISTORTION ➞ FLANGER 86
- 31: DISTORTION ➞ DELAY 86
- 32: ENHANCER ➞ CHORUS 86
- 33: ENHANCER ➞ FLANGER 87
- 34: ENHANCER ➞ DELAY 87
- 35: CHORUS ➞ DELAY 87
- 36: FLANGER ➞ DELAY 88
- 37: CHORUS ➞ FLANGER 88
- Configuración del Entorno de 89
- Operaciones del XP-80 89
- Ajustar la Afinación (Tune) 90
- [SYSTEM]➞[F2] (Tune) 90
- Ajustes MIDI (MIDI) 91
- [SYSTEM]➞[F3] (MIDI) 91
- [SYSTEM]➞[F4] (Control) 93
- [SYSTEM]➞[F5] (Arpeg) 94
- XP-80 (Info) 96
- [SYSTEM]➞[F6] (Info) 96
- Acerca del secuenciador 97
- Reproducir una canción 98
- Reserve 1 100
- Reserve 2 100
- Reserve 3 100
- Reproducir un Patrón 102
- Antes de grabar 105
- Ajustar el tipo de compás 106
- Grabar cambios de tempo 111
- Entrar Notas y silencios 114
- Pattern name 115
- Pattern beat 115
- Length of measure in Pattern 115
- Note Gate time 115
- Nota Tiempo de Puerta 115
- Suprimir la grabación (Undo) 116
- Guardar sólo la canción 117
- Archivo MIDI Estándar 117
- Configuración del entorno de 118
- Measure number 119
- Número del Compás 119
- La Función Locate 120
- Ajustar el bucle 121
- [SEQUENCER]➞[F5] (Loop) 121
- Acerca de Track Edit 122
- [SEQUENCER]➞[F3] (TrkEdit) 122
- Ajustar el área de la edición 123
- Target track 124
- Pista Destino 124
- Copiar una Frase - 3 Copy 125
- Meas (Insert Measure) 127
- (Modificar la Velocidad) 128
- (Change MIDI channel) 129
- Gate Time (Change gate time) 130
- 9 Merge 131
- Pista Fuente Pista Destino 132
- Truncate 136
- Acerca de la cuantificación 137
- [SEQUENCER]➞[F2] (Quantiz) 137
- La cuantificación Grid 138
- La Cuantificación Shuffle 139
- La Cuantificación Groove 140
- Volume label 143
- Ver la pantalla Microscope 145
- [SEQUENCER]➞[F4] (Micro) 145
- Borrar datos de performance 150
- Mover datos de secuenciador 150
- Copiar datos de secuenciador 150
- Tocar utilizando RPS 152
- Volume labelPlay mode 154
- Step number 154
- Chain play 155
- Acerca del Modo Utilidades 156
- Guardar datos de sonido en la 157
- Copiar un Performance 158
- [UTILITY]➞[2]➞[ENTER] 158
- Patch copy (Copiar un Patch) 159
- La función Patch Inicialize 161
- [UTILITY]➞[3]➞[ENTER] 161
- [UTILITY]➞[4]➞[ENTER] 162
- Int (Song Inicialize) 165
- [UTILITY]➞[8]➞[ENTER] 166
- Acerca del modo Disk 167
- Cargar en el XP-80 un archivo 168
- [DISK]➞[2]➞[ENTER] 169
- [DISK]➞[3]➞[ENTER] 170
- [DISK]➞[4]/[5]/[6]➞[ENTER] 171
- 7 Delete (Delete file) 172
- - 8 Rename 172
- [DISK]➞[9]➞[ENTER] 173
- Entrar en el modo GM 174
- Ajustar la Parte (Part) 175
- Parte (Info) 176
- [SHIFT]+[PERFORM]➞[F6] (Info) 176
- Funciones útiles del modo GM 177
- (GM Utility) 177
- Patches 179
- OUTPUTLEVEL 181
- CLICK OUT 181
- Cambiar de Patch 182
- Cambiar de Performance 182
- Cambiar de Set de Percusión 182
- Ajustar los parámetros 185
- MIDI OUT 186
- MIDI OUTMIDI IN 186
- Grabar en el XP-80 187
- Solucionar Pequeños Problemas 188
- Mensajes de Error 189
- Lista de Sets de Percusión 191
- Lista de Performances 192
- Lista de estilos de arpegio 193
- MIDI implementation 194
- ■ Channel Mode messages 196
- ■ System Realtime messages 197
- ■ System Exclusive messages 197
- ■ Channel Voice messages 198
- ■ Channel voice messages 199
- 1-1-1.System Common 202
- 1-1-2.Scale Tune 202
- 1-2.Performance 202
- 1-2-1.Performance Common 203
- 1-2-2.Performance Part 203
- 1-3.Patch 203
- 1-3-1.Patch Common 203
- 1-3-2.Patch Tone 204
- 1-4.Rhythm Setup 205
- 1-4-1.Rhythm Common 205
- 1-4-2.Rhythm Note 205
- 6. Supplementary material 206
- Thus, the address is: 207
- 00 00H Patch Common 208
- MIDI Implementation Chart 209
- Especificaciones 211
- Modo Patch [PATCH] 212
- Modo Performance [PERFORM] 213
- Pantalla 214
- Modo GM [SHIFT] + [PERFORM] 215
- Modo Secuenciador [SEQUENCER] 216
- Al pulsar [LOCATE] 217
- Al pulsar [REC] 217
- Al pulsar [F6] (List) 217
- Modo Chain Play [CHAIN PLAY] 218
- Modo Sistema [SYSTEM] 218
- Utility mode [UTILITY] 219
- Modo Disk [DISK] 220
- Information 226
Related products and manuals for Musical Instruments Roland XP-60
Musical Instruments Roland TD-6K User Manual
(76 pages)
Musical Instruments Roland KR7/5 User Manual
(200 pages)
(200 pages)
Musical Instruments Roland SI-24 User Manual
(52 pages)
(52 pages)
Musical Instruments Roland DP-990 User Manual
(108 pages)
(108 pages)
Musical Instruments Roland XP-60 Owner's Manual
(248 pages)
(248 pages)
Musical Instruments Roland RP101 User Manual
(52 pages)
(52 pages)
Musical Instruments Roland RS-70 User Manual
(178 pages)
(178 pages)
Musical Instruments Roland RP201 User Manual
(60 pages)
(60 pages)
Musical Instruments Roland HP 557R User Manual
(140 pages)
(140 pages)
MGE UPS Systems 30A manuels
Manuels d'utilisation et guides de l'utilisateur pour Unités d'alimentation électrique MGE UPS Systems 30A.
Nous fournissons des manuels en pdf 2 MGE UPS Systems 30A à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals