Roland KR-17 User Manual download pdf (Page 133)

133

Chapter 7 Creating and Editing Songs

Chapter 7

■

Re-Recording Part of Your

Performance (Punch-in Recording)

You can re-record part of a passage as you listen to a

recorded performance. This recording method is called

“Punch-in Recording.” This convenient function lets you

record over a specified points in a part as you listen to a

prerecorded performance in another section.

User Punch-In Recording by the following two methods:

Recording the Region Defined by Markers A and B

(Auto Punch-In/Out)

Before you start recording, place markers A and B to

define the passage you want to re-record. Make the

setting for punch-in recording, and re-record just the

passage between markers A and B.

Recording From the Point at Which the Pedal or Buttons

Are Pressed (Manual Punch-In/Out)

You can play back a performance and depress the pedal

at the desired place to start re-recording. Depressing the

pedal a second time cancels recording and returns you to

playback.

When you use the Performance Pads or [ (Rec)]

button, recording begins when you press the Pad or

button upon reaching a specified point in the song.

When you press the Pad or [ (Rec)] button once more,

the KR exits recording mode and returns to normal

playback.

❍

Recording a Passage Specified by Markers

Before you start re-recording, place markers A and B to

define the passage.

Following the procedures described in “Setting Markers

for Repeated Practice (Marker)” (p. 100), use Markers A

and B to specify the passage.

In the Rec Mode screen (p. 131), select <Auto Punch-In/

Out>.

fig.d-rec-punch.eps_50

This changes the recording mode to “Punch-In

Recording.”

Touch <Exit> to return to the Menu screen.

Begin recording.

Begin recording using the procedures described in

“Recording While Selecting the Track Buttons (Redoing

Recordings)” (p. 111) or “Multitrack Recording with 16

Parts (16-Track Sequencer)” (p. 127).

Up until the specified passage, the previously recorded

performance plays back.

When you reach the specified passage, sounds are erased

as recording starts; begin playing now.

When you reach the end of the specified passage,

recording stops, and the KR returns to playback of the

previously recorded performance.

When you press the [ (Play/Stop)] button, the

song stops.

❍

Starting Recording from the Measure

Specified by Buttons and Pedals

If using the Performance Pads or pedals, you must first

change the function of the pedals and Pads. Follow the

procedures in “Assigning Functions to Pedals and

Performance Pads (Pedal Setting/User Functions)” (p. 157),

and assign <Auto Punch-In/Out> to the buttons or pedal.

In the Rec Mode screen (p. 131), select <Manual Punch-

In/Out>.

This changes the recording mode to “Punch-In

Recording.”

Touch <Exit> to return to the Menu screen.

Begin recording.

Begin recording using the procedures described in

“Recording While Selecting the Track Buttons (Redoing

Recordings)” (p. 111) or “Multitrack Recording with 16

Parts (16-Track Sequencer)” (p. 127).

The previously recorded performance will be played

back.

Recording begins when you press the pedal, the

Performance Pad, or the [ (Rec)] button; start re-

recording at this time.

Recording stops when you press the pedal, the

Performance Pad, or the [ (Rec)] button again, and

the previously recorded performance is played back.

When you press the [ (Play/Stop)] button, the

performance stops.

* When you’re finished with Punch-In Recording, return to the

ordinary Replace Recording mode. Take a look at “Changing

the Recording Method” (p. 131).

KR-17_15_e.book 133 ページ２００４年１２月６日　月曜日　午後１時５４分

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 211 212

Comments to this Manuals

No comments

Roland KR-17 User Manual Page 133

Comments to this Manuals

Related products and manuals for The input devices Roland KR-17