Roland KR-17 User Manual download pdf (Page 22)

Before You Start Playing

Before You

Start Playing

Adjusting the Sound’s

Volume and Brilliance

Turn the [Volume] knob to adjust the overall volume.

Turn the [Brilliance] knob to adjust the brightness of

the sound.

fig.00-07.e

The mark at the top of the Volume knob indicates the volume level

typically produced by an acoustic piano. This is usually the most

appropriate volume for your piano performances.

Devices Equipped with CD Drives

If your device is equipped with a CD drive, you can use the

remote control to change the volume.

* Turning up the [Volume] knob will not increase the volume if

the remote control for the CD drive-equipped device is set to 0.

If the volume level for either unit is set to 0 (minimum), no

sounds will be played even when the volume setting on the

other unit is increased.

Connecting Headphones

The KR has two jacks for plugging in headphones. This

allows two people to listen through headphones

simultaneously, making it very useful for lessons and

performing piano pieces for four hands. Additionally, this

allows you to play without bothering others around you,

even at night.

Plug the headphones into the Phones jack located at the

bottom left of the piano.

Connecting headphones will automatically mute the

sound from the internal speakers.

The headphone volume is adjusted by the [Volume]

knob of the KR.

fig.00-04.e

NOTE

Use Stereo headphones.

Some Notes on Using Headphones

• To prevent damage to the cord, handle the headphones

only by the headset or the plug.

• Connecting the headphones when the volume of

connected equipment is turned up may result in damage

to the headphones. Lower the volume on the KR before

plugging in the headphones.

• Listening at excessively high volume levels will not only

damage the headphones, but may also cause hearing

loss. Use the headphones at a moderate volume level.

Connecting a Microphone

You can connect a microphone into the Mic In jack, and enjoy

karaoke with the KR.

fig.00-10

Connect a microphone (sold separately) to the Mic In

jack on the lower-right area of the instrument.

Rotate the [Mic Volume] knob in front of the Mic In

jack to adjust the volume level for the microphone.

Adjust the mic echo (p. 44).

Some Notes on Using a Microphone

• Be careful of high volume levels when using mikes late

at night or early in the morning.

• When connecting a microphone to the KR, be sure to

lower the volume. If the volume control is too high when

the microphone is plugged in, noise may be produced by

the speakers.

• Howling could be produced depending on the location

of microphones relative to speakers. This can be

remedied by:

- Changing the orientation of the microphone.

- Relocating microphone at a greater distance from

speakers.

- Lowering volume levels.

Min Max

Mellow

Bright

KR-17_15_e.book 22 ページ２００４年１２月６日　月曜日　午後１時５４分

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 211 212

Comments to this Manuals

No comments

Roland KR-17 User Manual Page 22

Comments to this Manuals

Related products and manuals for The input devices Roland KR-17