Roland JX-10 Owner's Manual download pdf (Page 6)

5. Hold Pedal Jack

By connecting the optional pedal switch DP-6 or DP-2, the Hold effect can be turned on or off by pressing the

pedal. "Hold" is the effect of keeping the sound even after the key is released.

6. MIDI Connector

This is for connecting to other MIDI device using the MIDI/SYNC cable (optional).

7. Programmer Connector

Connect this to the programmer PG-800 (optional) using the supplied 6P DIN cord.

8. Protect Switch

Always make sure that this switch is set to the ON position to protect the data in the JX-10, except when saving or

loading data.

9. Control Assign Jack

Use this jack when assigning the Control Changes with the expression pedal or pedal switch.

Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM

Pag. 6 of 53

1 2 3 4 5 6 7 8 9 10 11 ... 52 53

No comments

Roland JX-10 Owner's Manual Page 6