Roland TD-7K Owner's Manual download pdf (Page 14)

Setting Up the Kit

* Once the connections have been completed (p. 12, p. 13), turn on power to your various devices in the order

specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and

other devices.

fig.P-006

Turn the VOLUME knob on the TD-3’s rear panel completely to the left to lower the volume to “0.”

Turn down the volume control on the connected amp or audio system.

Set the POWER switch to the “ON” position to turn on the power.

* Always make sure to have the volume level turned down before switching on power. Even with the volume all the

way down, you may still hear some sound when the power is switched on, but this is normal, and does not

indicate a malfunction.

Turn on the power to the connected amp or audio system.

While hitting a pad, gradually turn the VOLUME knob to the right to adjust the volume level.

Turning On/Off the Power

1, 5

Precautions When Turning on the Power

fig.P-007

After the power is turned on, the drum kit

number appears in the display; do NOT hit any

pad or press any pedal until [DRUM KIT] has

lighted. Doing so can cause triggering problems.

TD-3_e.book 14 ページ２００４年５月１７日　月曜日　午前１０時６分

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

No comments

Roland TD-7K Owner's Manual Page 14