Roland TD-7K Owner's Manual download pdf (Page 41)

Pad Adjustments

When two pads are mounted on the same stand, hitting one pad may trigger the sound from another pad

unintentionally (This is called

crosstalk

.) Eliminate this by adjusting Crosstalk Cancel on the pad that is

sounding inadvertently.

In some cases, you can prevent crosstalk between two pads by increasing the distance

between them.

You cannot prevent crosstalk from pads connected to other drum sound modules. In that

case, mount them far apart or on different stands.

Press [EDIT].

[EDIT] flashes.

Press [EDIT] a few times until the XTALK CANCEL indicator is lit.

The XTALK CANCEL value is displayed.

fig.01-007

Hold down [EDIT] and press [-] to have the indicators light in the reverse order of that when

only [EDIT] is pressed.

Hit the pad you wish to set.

The trigger indicator for the struck pad lights momentarily.

Crosstalk Example: If you hit the snare pad and the hi-hat cymbal also sounds

Raise the “Xtalk Cancel (Crosstalk Cancel)” for the pad being used for the hi-hat. The hi-hat cymbal pad

will be less prone to receive crosstalk from other pads.

Press [+] or [-] to adjust the value.

If the value is set too high, and two pads are played simultaneously, the one that is struck less forcefully

may not sound. Be careful and set this parameter to the minimum value required to prevent crosstalk.

With a setting of “OFF,” crosstalk prevention will not work.

XTALK CANCEL:

OFF, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80

Hit the pad to check the setting.

Repeat Steps

–

until the crosstalk is eliminated.

Press [EDIT] to continue editing other settings.

When you’re finished, press [DRUM KIT]; the [EDIT] light goes off.

Do not turn off the power without the [EDIT] light having gone out. Otherwise you will lose

the changes you have just made.

If you want to make more detailed pad settings, refer to

“Pad and Trigger Settings”

(p. 50).

Eliminate Crosstalk Between Pads [XTALK CANCEL]

TD-3_e.book 41 ページ２００４年５月１７日　月曜日　午前１０時６分

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 75 76

No comments

Roland TD-7K Owner's Manual Page 41