Roland FC-300 Owner's Manual download pdf (Page 46)

Other Features

Set the system parameters with the following procedure.

In the top screen, press [UTILITY].

The [UTILITY] indicator lights, and the Utility screen appears in the display.

Press PARAMETER [ ] [ ] to call up the parameter you want to set.

Parameters that can be set and their screens are described in the next section.

Press VALUE [ ] [ ] to set the various parameters.

When you’ve finished making the settings, press [UTILITY] or [EXIT].

The data is saved, and FC-300 returns to the top screen.

Depending on where the FC-300 is placed, the display (on the right) may become

difficult to read.

If this occurs, adjust the display contrast.

Press PARAMETER [ ] [ ] to select “SYS:LCD Contrast.”

Press VALUE [ ] [ ] to adjust the contrast.

When you’ve finished making the settings, press [UTILITY] or [EXIT].

When the FC-300 is run on battery power, setting Economy Mode to ON enables

approximately 1.8 times continuous running time of the normal FC-300’s operating

mode.

Press PARAMETER [ ] [ ] to select “SYS:Economy Mode.”

Press VALUE [ ] [ ] to switch Economy Mode on and off.

When you’ve finished making the settings, press [UTILITY] or [EXIT].

Setting the System Parameters

Adjusting the LCD Contrast

Reducing Battery Consumption (Economy Mode)

The display and indicators

may flicker when Economy

Mode is set to ON, but this

does not indicate a

malfunction.

Economy Mode is available

only when running on battery

power.

FC-300_e2.book 46 ページ２００７年１０月４日　木曜日　午後５時２２分

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 71 72

No comments

Roland FC-300 Owner's Manual Page 46