Roland FC-300 Owner's Manual download pdf (Page 54)

Other Features

Press VALUE [ ] [ ] to make the setting.

Press [WRITE].

The “Now Sending...” message appears in the display when the FC-300 sends the

data. The top screen appears in the display when the FC-300 finishes sending the

data.

If either ALL, CONTROL, or PATCH is selected in Step 2, the message “Erase Tmp

Data Sure?” is displayed.

Press [WRITE] again; the data currently being edited (unsaved) in Control Change

mode and Patch mode is erased, and then the bulk dump begins.

FC-300 can receive the setting saved in the sequencer or the other FC-300 with

identical settings.

Making the Connections

• When receiving data saved to a MIDI sequencer

Connect the MIDI sequencer’s MIDI OUT to the FC-300’s MIDI IN connector

with a MIDI cable.

Transmitting

Press PARAMETER [ ] [ ] to select “Bulk Load.”

Transmit the data.

The “Now Receiving...” message appears in the display when the FC-300 receiving

the data.

The bulk load processing ended when the message “Now Waiting...” appears in the

display.

When you’ve finished receiving the data, press [UTILITY] or [EXIT].

The data is saved, and the FC-300 returns to the top screen.

Value

Explanation

ALL

All settings (UTILITY, STANDARD, CONTROL, PATCH) are transmitted.

UTILITY System parameter settings are transmitted.

STANDARD Standard Mode settings are transmitted.

CONTROL Control Change Mode settings are transmitted.

PATCH Patch Mode settings are transmitted.

Receiving Data from an External MIDI Device (Bulk Load)

For instructions on operating

the MIDI sequencer, see the

owner’s manual that came

with your MIDI sequencer.

ust as when transmitting data

to a MIDI sequencer, match the

FC-300’s and MIDI sequencer’s

Device ID settings (p. 52).

FC-300_e2.book 54 ページ２００７年１０月４日　木曜日　午後５時２２分

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 71 72

Comments to this Manuals

No comments

Roland FC-300 Owner's Manual Page 54

Comments to this Manuals

Related products and manuals for Music Pedal Roland FC-300