Roland FP-2 Owner's Manual download pdf (Page 50)

Chapter 4 Other Functions

Making the Settings for the

USB Driver

If you intend to connect to a computer using the USB

connector, you need to make the following setting before you

make the connection.

Hold down the [-] and [+] button, press the

[Power] switch to turn on the power.

fig.04-04

Press the [-] or [+] buttons to select the driver.

Turn on the power once again.

Restoring the Settings to the

Factory Condition

(Factory Reset)

The settings stored in the FP-2 can be returned to their

factory settings.

* Executing “Factory Reset” results in deletion of the Settings.

If you want to keep any data you have stored, use the “Bulk

Dump” operation to save the data to an external sequencer (p.

49).

Turn the volume to the minimum, and press the

[Power] switch to turn off the power.

Hold down the [Reverb] button, and press the

[Power] switch to turn on the power.

fig.04-04

Continue pressing the button until “Fct” appears in the

display.

fig.04-04

“Fct” appears in the display, and the button’s indicators

flash for several seconds. Then, the screen and buttons

go back to normal.

Disabling Everything Except

Piano Play (Panel Lock)

Once Panel Lock is engaged, the instrument will allow only

normal piano playing. All buttons (except for the [Reverb]

button, the [Sound Control] button, and the [Equalizer]

button) will not function. This prevents the settings from

being inadvertently modified even if children press the

buttons accidentally.

Turn the volume to the minimum, and press the

[Power] switch to turn off the power.

Hold down the [Piano] button and press the

[Power] switch to turn on the power.

fig.disp—-

Then, continue to hold down these two buttons by

following display will appear.

fig.04-04

Adjust the volume.

When you play the keyboard, the grand piano sound

will be heard.

It cannot be changed to another tone.

To defeat the Panel Lock function, turn the

volume down to the minimum, and turn on the

power once again.

Indication Description

vdr

(Vender)

Select this when using the supplied driver

with a USB connection.

GEn

(Generic)

Select this when using a generic USB driver

included with the OS with a USB connection.

While holding

down...

Turn on the Power

While holding

down...

Turn on the Power

While holding

down...

Turn on the Power

FP-2_e.book 50 ページ２００４年１１月２６日　金曜日　午後４時２５分

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Comments to this Manuals

No comments

Roland FP-2 Owner's Manual Page 50

Comments to this Manuals

Related products and manuals for Musical Instruments Roland FP-2