Roland VS-1680 User Manual download pdf (Page 127)

Tone Treble

This adjusts the volume of the Tape Echo sound’s high

end.

Pan HeadS

Pan HeadM

Pan HeadL

These adjust the pan settings for each of the short,

middle, and long delay playback heads individually.

This function is not featured on Roland’s RE-201.

WahFlutter Rate (Wah/Flutter Rate)

This adjusts the wavering of the pitch that occurs with

deterioration or unevenness in the tape. The higher

the value, the more intense the wavering effect.

EfxLvl (Effect Level)

This adjusts the volume level of the Tape Echo effect.

DirLvl (Direct Level)

This adjusts the volume level of the direct sound.

AnFl (Analog Flanger)

This is a stereo analog flanger effect that simulates

Roland’s SBF-325.

Sw (Switch)

This turns the analog flanger on and off.

Feedback

Feedback refers to returning the delayed signal (out-

put) back to the delay . This control adjusts the

amount of that signal that is returned. The flanger

effect intensifies the higher the value is set. Setting the

value too high can make lead to oscillation in the

sound.

Modulation Freq

(Modulation Frequency)

This adjusts the center frequency to which the flanger

effect is applied. This changes the pitch of the flanger

effect’s metallic sound.

Modulation Rate

This adjusts the flanger’s modulation rate.

Modulation Depth

This adjusts the depth of the flanger modulation.

ChB (Channel B Modulation)

You should usually set this to “Nor.” Setting this to

“Inv” inverts the Channel B flanger effect.

Mode

This is used to select the flanger effect type.

FL1: A general monaural flanger

FL2: A stereo flanger that moves the sound around

in the stereo field

FL3: Cross mix flanger that gives a more intense

effect

CHO: Chorus effect

Phase ChA (Phase Channel A)

Phase ChB (Phase Channel B)

This is used in selecting phase when mixing the direct

sound and flanger sound. Set to “Nor” for normal

phase; select “Inv” to invert the phase. This changes

the breadth of the sound, making sound “wider.”

Check the sound to assure you have the appropriate

setting.

AnPh (Analog Phaser)

The VS-1680’s features two analog phasers arranged in

parallel, so they can be used in stereo.

Sw (Switch)

This turns the Analog Phaser on and off.

Mode

This selects the number of levels (4 or 8) for the phase

effect.

Freq (Frequency)

This adjusts the center frequency to which the phase

effect is applied. With larger values, the phase effect is

applied to higher-frequency ranges.

Reso (Resonance)

This adjusts the amount of resonance. Raising the

value makes the characteristic sound more prominent.

Raising the value too much, though, may cause oscilla-

tion in the sound.

LFO1 Rate

LFO2 Rate

This adjusts the phase effect cycle length.

Function of Each Effect Parameter

127

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 135 136

Comments to this Manuals

No comments

Roland VS-1680 User Manual Page 127

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-1680