Roland VS-1680 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Universal System Exclusive Message
INQUIRY MESSAGE
Identity Request
Status Data Byte Status
F0H 7EH,Dev,06H,01H F7H
Byte Description
F0H Status of System Exclusive Message
7EH Universal System Exclusive Message Non Realtime Header
Dev Device ID (or 7FH)
06H General Information (sub ID #1)
01H Identify Request (sub ID #2)
F7H EOX (End of System Exclusive Message)
The message is used to request the particular information of the VS-1680.
The VS-1680 does not transmit the message.
If the VS-1680 received the message and the device ID of the message is same
as its device ID or 7FH, the VS-1680 transmits the following Identity Reply
message.
Identity Reply
Status Data Bytes Status
F0H 7EH,Dev,06H,02H,41H,7CH,00H,00H,00H,00H,00H,ssH,ssH F7H
Byte Description
F0H Status of System Exclusive Message
7EH Universal System Exclusive Message Non Realtime Header
Dev Device ID
06H General Information (sub ID #1)
02H Identify Request (sub ID #2)
41H Manufacturer ID (Roland)
0EH 01H Device Family Code (VS-1680)
00H 00H Device Family No.
00H
00H
ssH ssH Software Revision Level
F7H EOX (End of System Exclusive Message)
MIDI Machine Control Commands
Status Data Bytes Status
F0H 7FH,Dev,06H,aaH, ..., bbH F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
aaH Command
::
bbH Command
F7H EOX (End of System Exclusive Message)
(*) see ‘3. MIDI Machine Control’ section
MIDI Machine Control Responses
Status Data Bytes Status
F0H 7FH,Dev,07H,aaH, ..., bbH F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID
07H MMC Response Message
aaH Response
::
bbH Response
F7H EOX (End of System Exclusive Message)
(*) see ‘3. MIDI Machine Control’ section
Data Transfer (RQ1, DT1)
Data Request (RQ1)
Status Data Bytes Status
F0H 41H,Dev,00H, 0EH,11H,aaH,bbH,ccH,ssH,ssH,ssH,Sum F7H
Byte Description
F0H Status of System Exclusive Message
41H Manufacturer ID (Roland)
Dev Device ID
00H 0EH ModelID (VS-1680)
11H Command ID (RQ1)
aaH Address MSB
bbH Address
ccH Address LSB
ssH Size MSB
ssH Size
ssH Size LSB
Sum Check Sum
F7H EOX (End of System Exclusive Message)
The message is used to request data to the VS-1680.
The VS-1680 does not transmit this message.
The VS-1680 transmits the requested data using Data Set(DT1) under following
condition when it received the message.
1. The requested address correspond to the specified parameter base address
of the VS-1680.
2. The requested size is over 1 byte.
Data Set (DT1)
Status Data Bytes Status
F0H 41H,Dev,00H,0EH,12H,aaH,bbH,ccH,ddH, ..., eeH,Sum F7H
Byte Description
F0H Status of System Exclusive Message
41H Manufacturer ID (Roland)
Dev Device ID
00H 0EH Model ID (VS-1680)
12H Command ID (DT1)
aaH Address MSB
bbH Address
ccH Address LSB
ddH Data
::
eeH Data
Sum Check Sum
F7H EOX (End of System Exclusive Message)
The message is received under the following condition.
If the device ID on the message is same as that of the receive device, and the address on the
message correspond to the specified parameter base address, the received data are stored
from the specified parameter base address. If the interval of received messages is shorter
than 25 msec, the VS-1680 can not work the receive message procedure correctly.
The message is transmitted under the following condition.
When the VS-1680 transmit the data on the requested parameter after receiving the Data
Request message(RQ1).
see ‘2. Data Transfer Address Map’ for more details of the transfer parameters.
The message is transmitted under the following condition.
When the VS-1680 transmit the data on the requested parameter after receiving the Data
Request message(RQ1).
see ‘2. Data Transfer Address Map’ for more details of the transfer parameters.
MIDI Implementation
36
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 135 136

Comments to this Manuals

No comments