Roland VS-1680 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
Finalized CD!
This message appears when an attempt is made to
write to a commercial CD or a finalized CD-R disc.
Replace the disc with a blank disc or one that has not
been finalized.
Hardware Error!
There is a problem with the disk drive. Contact the
manufacturer or dealer of the disk drive.
Lack of CD-R Memory!
There is insufficient free space to write the songs to the
CD-R disc.
Lack of EVENT!!
You have tried to record AutoMix data in realtime,
when the remaining number of EVENT is less than
1000. Or, You have tried to UNDO or REDO when the
remaining number of Event is less than 200. You can-
not continue the current operation.
Lack of IDE Memory!
There is insufficient free space on the internal IDE
hard disk to make the image data file.
MARKER Memory Full!
The VS-1680 has used up all Marker Memory (1000
Markers) that can be handled by one song. Delete
unneeded Marker.
Medium Error!
There is a problem with the disk drive media. This
disk cannot be used by the VS-1680. In some case’s
recovery can be achieved by executing Drive Check
(Owner’s Manual p. 178).
No CD-R Drive!
Either no CD-R drive is connected, or the power is not
turned on.
No Data to Write
The track that you have selected to write to CD-R disc
contains no song data.
No Disc
There is no disc in the CD-R drive. Please insert a disc.
No Drive Ready
No disk drive is connected. Or, an internal hard disk is
not installed. Make sure that the disk drive is connect-
ed correctly.
No Effect Board A
No Effect Board B
A VS8F-2 effect expansion board (sold separately) is
not installed. This operation can be performed only if
a VS8F-2 is installed.
No IDE Drive!
The unit has no IDE-type disk drive. Install an internal
hard disk.
No Target Selected!
The tracks or the phrases are not selected for edit.
Not 44.1k Song!
The sample rate of the song is not 44.1 kHz, so the data
cannot be written to the CD-R disc.
Not 512byte/sector
The disk that you are using is not 512 bytes/sector.
This disk cannot be used by the VS-1680.
Not Ready!
The disk drive is not ready. Wait a short time.
Obey Condition?
This message asks if you agree to the terms and condi-
tions regarding the reproduction, broadcast, and sale
of the software. Please carefully read the License
Agreement.
Please Insert CD-R Disc!
Either the CD-R drive loading tray is still open, there
is no CD-R disc loaded, or the CD-R drive is otherwise
not ready. Insert CD-R disc.
Please Wait...
Operation is in progress. Please wait momentarily.
SCSI ID Error!
The SCSI ID numbers of two or more disk drives are
conflicting. Make settings so that the SCSI ID numbers
do not conflict.
SPC Not Available!
The SCSI components of the VS-1680 have malfunc-
tioned. Contact servicing by your dealer or qualified
Roland service personnel.
Error Messages
14
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 135 136

Comments to this Manuals

No comments