Roland CX-400 Specifications download pdf (Page 27)

Origin point

[0deg] [90deg]

AXIS ROTATE

0deg

AXIS ROTATE

0deg 90deg

Coordinate Rotation Settings

This rotates the cutting coordinates by 90 degrees. The default setting is at [0deg], and the origin point is set at the lower left of the

material. Setting this to [90deg] set the origin point at the lower right of the material and rotates the text (or graphics) by 90 degrees.

* Note that the coordinate axes change when rotated. Make the settings to match the program you're using. (When you are perform-

ing output using the CAMM-1 driver, set this to [0deg].)

When rotated 90 degrees, the X axis, Y axis, and origin point change as follows.

Press the [MENU] key to enter the menu mode, then

press the [

] key several times until the screen shown

at right appears.

Press the [ ] key to move to the setting screen, then

use the [

] and [ ] keys to select [0deg] or [90deg].

Press the [ENTER] key to enable the coordinates.

Press the [

] key to exit the menu mode.

1 ... 26 27 28 ... 64

No comments

Roland CX-400 Specifications Page 27