Roland CX-400 Specifications download pdf (Page 46)

Key Function Range Default

PRESET This calls up user-set cutting conditions matched to the Preset 1 to 8 –

tool and material in use.

FORCE This sets the force for the blade during cutting. 20 to 350gf 50gf

Perform a cutting test and set the conditions to match (10gf step)

the loaded material and the installed blade.

SPEED This sets the speed for the blade during cutting. 1 to 85 cm/s 50 cm/s

Perform a cutting test and set the conditions to match (1 cm/s step)

the loaded material and the installed blade.

CURSOR These move the material and the carriage. – –

[

] [ ] [ ] [ ] When a menu is displayed, these change the menu

items and setting values.

PAUSE This pauses cutting. The PAUSE LED lights up while – –

operation is paused. Pressing this a second time

cancels the paused state. To quit cutting, hold down

[ENTER] for 0.5 seconds or longer.

This key is also effective when performing material

feed using the [AREA MOVE] menu.

MENU This enters the menu mode. – –

In the menu mode, use the [

] and [ ] keys to move

to the next menu, the [ ] key to move to the setting

screen, and the [ ] key to move to the previous

screen.

ENTER This enables, runs, or stores the item shown on the – –

display.

ORIGIN Holding down this key for 0.5 seconds or longer sets – –

the origin point at the present blade position (the blade

center).

SHEET CUT Holding down this key for 0.5 seconds or longer cuts – –

off the material at the present position of the separating

knife. Press this to sever an already-cut piece of

material from a roll of material. Severing cannot be

performed while cutting is in progress.

TEST CUT Holding down this key for 0.5 seconds or longer – –

performs a cutting test at the present blade position.

For more information, see “4-3 Adjusting the Blade

Force and Cutting Speed.”

MENU + Power on This sets the language for messages on the display.

/ ENGLISH/ ENGLISH

(LANGUAGE) You can select from among seven languages:

PORTUG / ITALIANO/

Japanese, English, Portuguese, Italian, Spanish,

ESPAÑOL / FRANÇE/

French, and German.

Deutsch

Power on This selects the type of material to use and enables the ROLL/PIECE/ –

(SELECT SHEET) setup state. For more information, see “5-2 Details of F-EDGE/R-EDGE

the Origin-point Location and Cutting Area.”

7-3 List of Functions

Control-key Functions

This describes the functions of the control keys when pressed.

1 ... 45 46 47 ... 64

Comments to this Manuals

No comments

Roland CX-400 Specifications Page 46

Comments to this Manuals

Related products and manuals for Print & Scan Roland CX-400