Roland R-44 Specifications Page 19
- Page / 88
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
19
Introducing the R-44
If you press the [DISP] button from the Main screen, the progress bar area changes so the remaining
project time (REM: REMAIN) is shown.
fig.play-disp2.eps
The Mixer screen
From the Main screen, press the [DISP] button twice to show the Mixer screen.
This screen lets you adjust the volume balance for monitoring.
fig.play-disp3.eps
Marker indicator
The number on the left is the number of the marker located immediately
before the current time counter value. The number on the right indicates the
total number of markers assigned in the currently selected project.
E indicates the end of the current project.
Monitor level meters These are the output level meters. The output level assigned to the L/R
channels of the monitor is displayed as the final output level after mixing the
L and R channels separately. You can adjust the level of each channel with the
channel level sliders from the Mixer screen. The level meter is calibrated at
-36, -20, -12, -6, or -3 dBFS from the left.
Clip level indicators
Power source
Displays the power supply source for the R-44. When power is supplied via
the AC adaptor, a power plug icon is shown; when power is supplied via
batteries or an external power supply device (p. 27), a battery icon is
displayed.
Date and time Displays the current date and time (p. 62, p. 70).
Remaining time
Displays the remaining time during playback from the current location to the
end of the project.
Channel level sliders
These sliders adjust the playback level for each channel. Use the CURSOR
buttons [ ] [ ] to select a slider, and turn the [SCRUB/VALUE] dial to
adjust the value. Each slider can be adjusted within the range 0–120. The
default value is 100.
*The settings are stored by the R-44 and not in the project. When you turn off
the power, the settings revert to the default value.
*These settings do not affect the recording levels.
Remaining time
Channel names Output assignments
Channel level
sliders
Channel level meters
Monitor level meters
4AGAPGYDQQMࡍࠫ㧞㧜㧜㧤ᐕ㧡㧝㧡ᣣޓᧁᦐᣣޓඦᓟ㧠ᤨ㧡㧟ಽ
- 04897867 08-08-3N 1
- Apparatus containing 2
- Lithium batteries 2
- USING THE UNIT SAFELY 3
- IMPORTANT NOTES 5
- Additional Precautions 6
- Before Using Cards 6
- Using Memory Cards 6
- Copyright 6
- Contents 7
- Checking the Included Items 8
- Hold Switch [HOLD] 10
- Low Cut Switch [LOW CUT] 10
- Limiter Switch [LIMITER] 10
- PREV Button [PREV] 12
- NEXT Button [NEXT] 12
- Play Button [PLAY] 12
- Front Panel 13
- Side Panel (Left) 14
- Grounding Terminal 15
- Line Output Jacks [LINE OUT] 15
- Side Panel (Right) 16
- Bottom Panel 17
- While Playing or Stopped 18
- The Mixer screen 19
- The Main screen 20
- Introducing the R-44 21
- Projects 22
- Project Name 23
- Getting Ready to Use the R-44 24
- Battery Status 26
- Using External Power Sources 27
- Preparing the SD Memory Card 28
- Recording 29
- ● Low cut 30
- ● Input level knobs 30
- ● Record button [REC] 31
- ● Other settings 31
- ● Phantom power switch 32
- ● System settings 32
- ● Connections 33
- ● Limiter 34
- CD player for playback 38
- Playing Back 41
- Setup Before Playback 43
- Speaker Settings 44
- Repeat Playback (A-B REPEAT) 47
- Selecting a Project (Select) 48
- Renaming a Project (Rename) 49
- Copying a Project (Copy) 50
- Moving a Project (Move) 51
- Deleting a Project (Delete) 52
- Repairing a Project (Repair) 54
- Applying Effects 56
- 1: 3-Band EQ 58
- 2: Graphic EQ 58
- 3: Noise Gate 58
- 4: Enhancer 59
- 5: Comp&DeEsser 59
- 6: MS-Mic 59
- System Setup 60
- Example Operations 61
- Date & Time Settings 62
- Project Name Settings 63
- System Menu 66
- 2 Player Setup 68
- 3 Speaker 69
- 4 Display Setup 69
- 5 System Setup 69
- 6 Date & Time 70
- 7 Project Name 70
- 8 SD Card 70
- 9 Factory Reset 70
- Appendix 71
- Macintosh OS X 72
- Transmission Side 73
- Receiving Side 73
- CTRL SYNC 73
- Messages 74
- Troubleshooting 75
- Problems with Playback 77
- Problems with R-44 Operation 78
- Main Specifications 79
- Other Terminals 80
- Built-In Effects 80
- Controls 80
- Block Diagram 81
- Format: MONOx4 85
- Format: 4CHx1 85
- Format: STEREO x 2 85
- For EU Countries 86
- For China 86
Related products and manuals for Recording Equipment Roland R-44
Recording Equipment Roland MC-4 User Manual
(36 pages)
(36 pages)
(1 pages)
Recording Equipment Roland CD-2u Owner's Manual
(140 pages)
(140 pages)
(16 pages)© 2020, manymanuals.com. All rights reserved. | 0.391 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals