Roland R-44 Specifications download pdf (Page 66)

System Setup

The values in boldface are the default values.

*You cannot make Recording Setup settings during recording or playback.

*The R-44 is not able to convert previously recorded data to a different data format.

System Menu

1 Recording Setup

Menu item Value Function

Input Select

Analog

This selects the type of input.

Choose this setting if you want to record analog input. Connect your

microphones or analog audio device to the Combo input jacks. With this setting,

any input from the internal mics or the Digital input jack is ignored.

Digital

Choose this setting if you want to record digital input. The signal from a digital

device connected to the Digital input jack is recorded. With this setting, any

input from the internal mics or the Combo input jacks is ignored.

The sampling frequency is specified by the Rec Freq. setting, and the bit depth

by the Rec Bit setting.

IntMic

Choose this setting if you want to record via the internal mics. Limiter and Low

cut are disabled, and SENS has three levels.

Dig + Ana

Choose this setting if you want to simultaneously record digital and analog

input. The signal from the digital device connected to the Digital input jack and

the signal from the microphones or analog audio device connected to the Combo

input jacks are recorded simultaneously. For these settings, the digital input is

on channels 1 and 2. Use channels 3 and 4 for the analog input.

Int + Ana

Choose this setting if you want to simultaneously record from the internal mics

and analog input. MIC-L is on channel 1, and MIC-R is on channel 2. Use

channels 3 and 4 for the analog input. Limiter and Low cut are disabled, and

SENS has three levels.

Rec Freq.

44.1 kHz,

48.0 kHz,

88.2 kHz,

96 kHz,

192 kHz

This sets the sampling frequency for recording.

Higher sampling frequencies allow higher-quality recording but produce larger

project files, meaning that there will be less available recording time on the SD

memory card.

The 44.1 kHz setting is sufficient when recording audio that falls within the

normally audible range. This frequency is also the most suitable if you are going

to load the recorded file into your computer to create a music CD.

You can use the higher frequency settings when recording audio that contains a

significant amount of high-frequency content from instruments such as cymbals

or when you want to capture the brightness and transparency of a natural

environment.

*When Rec Freq. is 192 kHz, only 2-channel recording is possible.

Rec Bit

16 bit,

24 bit

This sets the sample size (bit depth) for recording. A larger sample size allows

the sound to be captured in greater detail but produces a larger project file,

meaning that there will be less available recording time on the SD memory card.

Use the 16-bit setting for normal recording. This setting allows the broadest

compatibility when loading the recorded file into your computer for playback.

Use the 24-bit setting if you want to capture the tonal character and ambience in

greater detail, such as when recording an instrumental or vocal performance.

Depending on the PC environment, you may not be able to play project files

recorded in 24 bit.

4AGAPGYDQQMࡍ࡯ࠫ㧞㧜㧜㧤ᐕ㧡᦬㧝㧡ᣣޓᧁᦐᣣޓඦᓟ㧠ᤨ㧡㧟ಽ

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

Comments to this Manuals

No comments

Roland R-44 Specifications Page 66

Comments to this Manuals

Related products and manuals for Recording Equipment Roland R-44