Roland R-44 Specifications Page 27
- Page / 88
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
27
Getting Ready to Use the R-44
When using an external power supply, be sure to set the final voltage.
The final voltage refers to the voltage when voltage can no longer be supplied because the capacity of the
external power source is reduced and voltage decreases as electricity is consumed. If the final voltage is not
properly set for the external power source, the remaining power display cannot be shown. Refer to the
user’s manual of the external power supply for the final voltage value.
Furthermore, when the “Battery Low” message is displayed, the recording automatically stops, and the
power automatically turns off. Turn the R-44’s power off and change the external power source.
*When using an external power source, even when power is automatically cut off, the R-44 starts within 30 seconds
after power is turned back on. During this period, the final voltage settings can be changed.
*Read the following to set the final voltage for the R-44.
Refer to the user’s manual for the external power source when using an external power source.
Setting the final voltage
ion.eps
1
Press the [MENU] button.
The display shows the System menu.
ion.eps
2
Use the Cursor buttons [ ] [ ] to select 5 System Set
Up
, and press the [ENTER] button.
The System Setup screen is shown.
ion.eps
3
Use the Cursor buttons [] [] to select the Ext-
Power
item.
ion.eps
4
Use the [SCRUB/VALUE] dial to set the final voltage.
Final voltage values:
Adaptor/9.0/9.5/10.0/10.5/11.0/11.5/12.0 V
*The final voltage value will differ according to the external power
source specifications. Check the specifications for the external power
source being used for details.
*When the AC adaptor is used for power, set the final voltage (Ext-
Power) to Adaptor.
5
Press the [EXIT] button twice to return to the Main screen.
This completes setting the final voltage.
Using External Power Sources
4AGAPGYDQQMࡍࠫ㧞㧜㧜㧤ᐕ㧡㧝㧡ᣣޓᧁᦐᣣޓඦᓟ㧠ᤨ㧡㧟ಽ
- 04897867 08-08-3N 1
- Apparatus containing 2
- Lithium batteries 2
- USING THE UNIT SAFELY 3
- IMPORTANT NOTES 5
- Additional Precautions 6
- Before Using Cards 6
- Using Memory Cards 6
- Copyright 6
- Contents 7
- Checking the Included Items 8
- Hold Switch [HOLD] 10
- Low Cut Switch [LOW CUT] 10
- Limiter Switch [LIMITER] 10
- PREV Button [PREV] 12
- NEXT Button [NEXT] 12
- Play Button [PLAY] 12
- Front Panel 13
- Side Panel (Left) 14
- Grounding Terminal 15
- Line Output Jacks [LINE OUT] 15
- Side Panel (Right) 16
- Bottom Panel 17
- While Playing or Stopped 18
- The Mixer screen 19
- The Main screen 20
- Introducing the R-44 21
- Projects 22
- Project Name 23
- Getting Ready to Use the R-44 24
- Battery Status 26
- Using External Power Sources 27
- Preparing the SD Memory Card 28
- Recording 29
- ● Low cut 30
- ● Input level knobs 30
- ● Record button [REC] 31
- ● Other settings 31
- ● Phantom power switch 32
- ● System settings 32
- ● Connections 33
- ● Limiter 34
- CD player for playback 38
- Playing Back 41
- Setup Before Playback 43
- Speaker Settings 44
- Repeat Playback (A-B REPEAT) 47
- Selecting a Project (Select) 48
- Renaming a Project (Rename) 49
- Copying a Project (Copy) 50
- Moving a Project (Move) 51
- Deleting a Project (Delete) 52
- Repairing a Project (Repair) 54
- Applying Effects 56
- 1: 3-Band EQ 58
- 2: Graphic EQ 58
- 3: Noise Gate 58
- 4: Enhancer 59
- 5: Comp&DeEsser 59
- 6: MS-Mic 59
- System Setup 60
- Example Operations 61
- Date & Time Settings 62
- Project Name Settings 63
- System Menu 66
- 2 Player Setup 68
- 3 Speaker 69
- 4 Display Setup 69
- 5 System Setup 69
- 6 Date & Time 70
- 7 Project Name 70
- 8 SD Card 70
- 9 Factory Reset 70
- Appendix 71
- Macintosh OS X 72
- Transmission Side 73
- Receiving Side 73
- CTRL SYNC 73
- Messages 74
- Troubleshooting 75
- Problems with Playback 77
- Problems with R-44 Operation 78
- Main Specifications 79
- Other Terminals 80
- Built-In Effects 80
- Controls 80
- Block Diagram 81
- Format: MONOx4 85
- Format: 4CHx1 85
- Format: STEREO x 2 85
- For EU Countries 86
- For China 86
Related products and manuals for Recording Equipment Roland R-44
Recording Equipment Roland MC-4 User Manual
(36 pages)
(36 pages)
(1 pages)
Recording Equipment Roland CD-2u Owner's Manual
(140 pages)
(140 pages)
(16 pages)© 2020, manymanuals.com. All rights reserved. | 0.405 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals