Roland SYS-553 Owner's Manual download pdf (Page 59)

Metering

This section describes the METER screen, where you can view a

list of channel levels.

In the top panel’s DISPLAY section, press [METER].

fig.ScrMeter.eps

The METER screen is displayed.

You can view a list of the levels of the channels.

To change the level detection point of the meter and make peak

hold settings, you use the METER FUNCTION screen.

Access the METER screen.

Press [FUNC] to access the METER FUNCTION screen.

The functions available at the METER FUNCTION screen are as

follows:

For information on PEAK CLEAR, go to “Basic operation,“ and

refer to “Peak clear“ (p. 33).

For information on HOME SCREEN, go to “User preferences ,“

and refer to “Selecting the Home screen” (p. 95).

About the meters

Accessing the METER screen

METER FUNCTION screen

PEAK HOLD

This turns the meter’s peak hold function on/off.

PEAK HOLD TIME This sets the duration that the meter’s peak hold or

OVER indication stays lighted, in a range of 1 sec to 4

sec or CONTINUE. Meter peak hold is enabled only

when the PEAK HOLD is on.

OVER LEVEL This adjusts the level at which the OVER indication of

the meter lights up, in a range of -18 dB to 0 dB.

CH METERING

POINT

Use these to select the level detection point for the

CH meters.

BUS METERING

POINT

Use these to set the level detection point for the

AUX/MTX/MAIN meters.

HOME

SCREEN

Selects the unit’s Home screen.

PEAK CLEAR Clears the level meter’s peak hold or over indication.

M-200i_e.book 59 ページ２０１３年６月２８日　金曜日　午後１時２７分

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 148 149

No comments

Roland SYS-553 Owner's Manual Page 59