Roland VS-1680 User Manual download pdf (Page 111)

Room Size

Adjust the size of the room.

Time (Reverb Time)

Adjust the time over which the later reverberation will

decay.

PreDLY (Pre Delay)

Adjust the time until the later reverberation appears.

Difusi (Diffusion)

Adjust the spread of the reverb sound.

Densty (Density)

Adjust the diffusive spaciousness of the early reflec-

tions.

ERLvl (Early Reflection Level)

Adjust the level of the early reflections.

LF Damp Gain

Adjust the degree of LF damping. With a setting of 0,

there will be no damping. As the value is decreased,

damping will become more pronounced.

LF Damp Freq (LF Damp Frequency)

Adjust the frequency at which LF damping will begin

to take effect.

HF Damp Gain

Adjust the degree of HF damping. With a setting of 0,

there will be no damping. As the value is decreased,

damping will become more pronounced.

HF Damp Freq (HF Damp Frequency)

Adjust the frequency at which HF damping will begin

to take effect.

HiCF (High Cut Frequency)

Adjust the frequency at which the high frequencies of

the reverb sound will be cut.

EfxLvl (Effect Level)

Adjust the volume of the reverb.

DirLvl (Direct Level)

Adjust the volume of the direct sound.

Delay

Delay is an effect that adds delayed sound (s) to the

direct sound, adding depth to the sound or creating

special effects.

Sw (Switch)

Turn the delay on/off.

Time (Delay Time)

Adjust the delay time.

Other elements

The tonal characteristics of the reverb are affected

by the materials of the surfaces (walls, etc.) off

which the sound is reflected. The HF Damp and

LF Damp parameters let you adjust the tonal

quality as affected by such conditions.

HF Damp: The materials of the reflective sur-

face will affect the way in which the

high frequencies of the sound are

attenuated. HF Damp adjusts the

way in which the high frequencies

are attenuated. Lower values will

cause the high frequencies of the

later reverberation to be attenuated

more sharply.

LF Damp: The materials of the reflective sur-

face will also affect the way in which

the low frequencies of the sound are

attenuated. LF Damp adjusts the

way in which the low frequencies

are attenuated. Lower values will

cause the low frequencies of the later

reverberation to be attenuated more

sharply.

Function of Each Effect Parameter

111

How reflections and time are related

Reflected sound reaches the listener in the follow-

ing sequence. The Pre Delay is the time from when

the direct sound is heard until the reverb is heard.

The Reverb Time is the time over which the reverb

decays to silence.

fig.ap (efx)-71 (rev_time.eps)

Level

Early reflections

Direct sound

Time

Pre Delay

Reverb Time

Later reverberation

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 135 136

Comments to this Manuals

No comments

Roland VS-1680 User Manual Page 111

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-1680