Roland VS-1824 Owner's Manual download pdf (Page 58)

Algorithm List

Reverb 2

This gate reverb works in either of two modes of gate operation (Gate/Ducking). In the Gate mode, the gate opens

when a certain volume (Threshold Level) is exceeded while in the Ducking mode, the gate opens when the

volume becomes as low as or lower than Threshold Level. You can use two reverbs (FX1 and FX2) with different

settings, or use it in combination with a previous reverb.

fig.08-49

Reverb 2

3BAND EQ

Input L

Input R

Direct Level

Output L

Output R

Reverb types

There are five reverb types: You can choose the type with Reverb Type.

Room1: Ordinary room reverb

Room2: Room reverb with a softer tone compared with Room1

Hall1: Ordinary hall reverb

Hall2: Hall reverb with a softer tone compared with Hall1

Plate: Plate reverb

Selecting Gate type

Reverb sounds have different effects depending on the gate operation types. Use Gate Mode to select the type.

Gate: The gate opens when the volume of the direct sound exceeds the value set with

Threshold Level (Thres). The gate closes when the volume drops below the Threshold

Level value.

Duckn: Operates in the opposite manner as in the “Gate” mode. The gate closes when the

volume of the direct sound exceeds the value set with Threshold Value. The gate opens

when the volume becomes as low as or lower than the Threshold Level value.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 139 140

No comments

Roland VS-1824 Owner's Manual Page 58