Roland VS-1824 Owner's Manual download pdf (Page 7)

Troubleshooting

Internal Effects

Effects cannot be used

• The VS8F-2 has not been installed correctly (User Guide

p. 6, 9).

• Only one VS8F-2 has been installed (when EFFECT B

cannot be used).

• You are attempting to select the algorithm for Reverb,

Gated Reverb, Vocoder 2, Voice Transformer or

Mastering Tool Kit with FX2 or FX4.

• You are already attempting to select the algorithm for

Vocoder 2, Voice Transformer or Mastering Tool Kit

with FX1 or FX3 (Owner’s Manual p. 101).

• I’d like to change the order of an effect algorithm.

→ The connection orders cannot be altered. They can

only be turned on or off. For more detailed

information on what goes on with the algorithm

orders, please refer to the “Algorithm List” (p. 25).

CD-RW Drive Problems

I made an audio CD on the CD-R/RW

drive, but it doesn’t play on a

consumer CD player.

• The finalized process was not carried out. When making

audio CDs, set “Finalize” to “On” or “OnlyFin.”

(Owner’s Manual p. 189).

• Audio CD’s created using a CD-RW disc cannot be

played on a conventional CD player. Please use a CD-R

disc.

The CD-R drive is not being recognized

• The CD-RW drive is not connected correctly.

• The same device ID number is assigned to two or more

SCSI devices (Zip drives , CD-RW drives, etc.).

• No CD-R/RW disc is inserted in the drive.

•A CD-RW drive that is not designated by Roland.

Cannot write to CD-R/RW discs

• The song’s sample rate is set to something other than

44.1 kHz (Owner’s Manual p. 50, 186).

• The internal IDE hard disk does not have sufficient free

disk space.

• The CD-R/RW disc does not have sufficient free space.

• You are trying to write to a commercial CD software

disc.

• You are trying to write to a CD-R disc that has been

finalized.

• The CD-RW disc of high speed correspondence is used.

• Mass type discs (80 minute / 700MB type etc.) are used.

MIDI Devices Problems

With the VS-1824 as master, the MIDI

sequencer does not respond to

commands

• The MIDI cable is not connected correctly.

• The MIDI cable is broken.

• The MIDI Thru switch is not set to “Out” (Owner’s

Manual p. 198).

• “Sync Gen.” (the sync generator) is not set to the

appropriate synchronization method (MTC, MIDI Clock,

Sync Track) (Owner’s Manual p. 198).

• The EXT indicator is blinking (“Sync Source” is set to

“EXT”).

• The two devices are not set to the same type of MTC

(during MTC synchronization).

• The MIDI clock data has not been recorded on the sync

track (if you are using the sync track for

synchronization).

• The settings of the MIDI sequencer are not correct.

• The MIDI sequencer is not ready to playback.

• he VS-1824 mixer level and pan settings changed by

themselves.

→ The VS-1824 receives Control Change messages as

well as System Exclusive messages. When set to

receive Control Change messages transmitted by a

MIDI sequencer, the VS-1824’s mixer can be

controlled by external devices. When this feature is

not needed, set the “Control Type” to “Off.”

OK NG

1 2 3 4 5 6 7 8 9 10 11 12 ... 139 140

Comments to this Manuals

No comments

Roland VS-1824 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-1824