Roland CJ-540 User Manual download pdf (Page 38)

Chapter 2 - Basic Operation

2-1 Examples of Operations with This Machine

You can perform a wide variety of operations with this machine. For example, you can perform only printing, perform

only cutting, or perform printing and cutting, or even perform printing, then remove the media, laminate it, and then cut

it.

The results of operations such as printing only or cutting only differ depending on the settings used to send the data from

the raster image processor (RIP). For information on how to make the RIP settings, refer to the documentation for the RIP

you're using.

For detailed information about the different operations, refer to the following sections of this manual.

• Performing printing only ☞ "2-4 Printing"

• Performing cutting only ☞ "2-5 Cutting"

• Performing printing and cutting ☞ "2-6 Printing and Cutting"

• Removing the media after printing, then reloading it and performing cutting ☞ "2-7 Reloading the Media

and Performing Cutting"

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 123 124

No comments

Roland CJ-540 User Manual Page 38