Roland CJ-540 User Manual download pdf (Page 56)

Chapter 2 - Basic Operation

Media Sizes Allowing Automatic Crop-mark Detection

When you are printing with crop marks, set a margin of at least 90 mm (3-9/16 in.) before the next print-start position.

You can set the margin value with the RIP you're using. For information on how to make the setting, refer to the docu-

mentation for the RIP you're using.

Printing with Crop Marks

Load media and output the data. Crop marks are automatically printed at four places.

Use your RIP to make the setting for printing crop marks. For information on how to make the setting, refer to the

documentation for the RIP you're using.

You can use BASE POINT and ALIGN POINT 1 through ALIGN POINT 3 to perform alignment automatically or

manually. For information about how to make the settings, see the following section.



: Pinch rollers: Crop marks

Where to cut the media off

12.5 mm (0.5 in.)

1.5 mm (about 0.06 in.)

12.5 mm (0.5 in.)

1.5 mm (about 0.06 in.)

90 mm (3-9/16 in.)

or more

12.5 mm (0.5 in.)

The actual size where

output is possible

Cropmark

(ALIGN POINT2)

Cropmark

(BASE POINT)

Cropmark

(ALIGN POINT3)

Cropmark

(ALIGN POINT1)

2-7 Reloading the Media and Performing Cutting

Crop marks and the like drawn with computer programs cannot be used as crop marks by this machine.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 123 124

No comments

Roland CJ-540 User Manual Page 56