Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen
because it is warped or wrinkled, increasing the suction force may help correct the problem. Conversely,
when the media is imsy and cannot move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media
width.
You can also make this setting on the computer. When you have made the setting on the computer,
the computer's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
Speeding Up Output for Narrow Media
Procedure
Press .
Press several times.
Press .
Press several times.
Press .
Use to select "SHEET" or "OFF."
Press to enable the setting.
Press .
Press to go back to the original screen.
Description
This shortens output time by reducing the width of head movement to the minimum necessary. This
is eective when the width of the media or the output data is narrow.
"SHEET" matches the range of head movement to the width of the media.
"OFF" matches the range of head movement to the output data. Movement is limited to the minimum
amount necessary, and this can be expected to yield the fastest output. Note, however, that because
the speed of media movement is no longer constant, colors may be uneven.
"FULL" makes the speed of media movement constant at all times.
Default Setting
[FULL WIDTH S]: FULL
6-4 Accommodating Various Kinds of Media
96
Chapter 6 Feature Reference
Chapter 6 Feature Reference
Comments to this Manuals