Roland ADA-7000 Owner's Manual download pdf (Page 15)

Troubleshooting

If the ADA-7000 does not function correctly, please check the following points before

you suspect a malfunction.

If checking these points does not resolve the problem, please contact Roland, a nearby

Roland service center, or your dealer.

The CLOCK SOUCE R-BUS (RMDB2) indicator is blinking.

No sampling clock is being input to the R-BUS connector of the ADA-7000. Make the

correct master clock settings on the device connected to the R-BUS connector (p. 8).

Alternatively, select a different sampling clock.

The CLOCK SOURCE WORD CLOCK indicator is blinking.

A word clock signal is not being input correctly. Make the correct connections on the

device that is supplying the word clock (p. 9). Alternatively, select another sampling

clock.

The sound that is input to the ADA-7000 is not output from the

device (digital mixer, digital recorder) that is connected to the

R-BUS connector of the ADA-7000.

• Has the correct sampling clock (master clock) been selected on the ADA-7000 and

on the device connected to the ADA-7000’s R-BUS connector?

• Has the volume of the audio device been raised?

• Is the input sensitivity (INPUT knob) too low? (p. 7)

No sound is output from the ADA-7000

• Have you made the correct sampling clock (master clock) settings for the ADA-

7000 and for the devices connected to the ADA-7000’s R-BUS connector?

• Has the volume of the audio device been raised?

The ADA-7000’s buttons and knobs have no effect.

Has the device connected to the R-BUS connector been set to disable the panel operations

of the ADA-7000?

The volume level of the instruments connected to OUTPUT

connectors is too low.

Could you be using a connection cable that contains a resistor? Use a connection cable

that does not contain a resistor.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Roland ADA-7000 Owner's Manual Page 15