Roland ADA-7000 Owner's Manual download pdf (Page 19)

Supplementary Notes

ADA-7000 setting

Check if the clock source on the ADA-7000 is set to R-BUS. When the ADA-7000 is booted up, the clock source is set

to R-BUS.

* Refer to ADA-7000 Owner’s Manual p. 6 “Clock source.”

VSR-880 setting

Set the master clock of the VSR-880 to INTERNAL as follows.

1. Press [SYSTEM] while holding [SHIFT]. “SYS System PRM?” appears in the display.

2. Press [ENT/YES].

3. Select SYS MasterClk= INT with TIME/VALUE dial, then press [ENT/YES].

* Refer to VSR-880 Owner’s Manual p. 108 “Select the Master Clock.”

* If you set the clock source differently, please refer to the

ADA-7000 Owner’s Manual p. 6 “Clock source” and the VSR-880 Owner’s Manual p. 108 “Select the Master

Clock.”

Note

* DIF-AT Interface Box cannot be used even if connected to the ADA-7000 via R-BUS.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Roland ADA-7000 Owner's Manual Page 19