Roland V-4EX Owner's Manual download pdf (Page 10)

About the Power Supply

Turning the Power On and O

Once everything is properly connected, be sure to follow the procedure below to turn on their power. If you turn on equipment in

the wrong order, you risk causing malfunction or equipment failure.

* This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning the unit on is required before it will operate normally.

Turning the Power On

Make sure the power cable is securely inserted, then press the [POWER] button located on the rear panel. The buttons and

indicators on the top panel ash, and the V-4EX starts up.

g.power-button.eps

Turning the Power O

Press the [POWER] button on the rear panel. The buttons and indicators on the top panel go dark, and the power to the V-4EX is

switched o.

About AUTO OFF

When all of the conditions described below continue for 240 minutes or longer, the V-4EX automatically powers down (AUTO OFF

feature).

• No operation of the unit (including operation by remote control)

• No video input

To keep the power from being turned o automatically, disable the AUTO OFF feature. You can disable the AUTO OFF feature by

going to the [SETUP] menu and setting [AUTO OFF] to [OFF]. Refer to “Menu Operations” (p. 39) and “SETUP Menu” (p. 43).

• Any settings that you are in the process of editing will be lost when the power is turned o. If you have any settings that you want to keep, you

should save them beforehand.

• To restore power, turn the power on again.

1 ... 9 10 11 ... 64

Comments to this Manuals

No comments

Roland V-4EX Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Mixers Roland V-4EX